 What should I include in my garage/shop? |
|
|||||||||
  |
 Apr 29 2009, 06:17 PM
Post
#21
|
|
|
I build race cars  Group: Advanced Members Posts: 4,748 Joined: 31-August 05 From: Central coast, CA Member No.: 874  |
Here's a few things that make my shop functional:
Shelves for frequently used items - I like all my stuff visible, not hidden in cabinets. It all gets dusty, but I can usually find stuff fast. Shelves mounted very sturdily - some of those red bins weigh 30#. There are many more now. Outlets located just under the shelves - above the clutter of the workbenches. If I was to build a shop I'd put a double duplex every 32" in this area. Note how the power strip is tipped so outlets are pointing down - the dust in my shop has a high metal content, and is conductive. Blow out the outlets once in a while, before they make sparks. Lighting - under lower shelf is now a dual 4' T8. Overhead is 3 continuous rows of dual 4' T8 fixtures = 34 bulbs serving approx 950sf. It's just about right. Higher ceiling would need more. This area has a loft overhead for storage, ceiling is under 8' with beams lower than that. A full 8' clear all over would be better. If you can recess the sprinker heads, do it. When I'm handling lengths of steel I'm constantly reminding myself of the sprinklers - really don't want to knock one of the heads off. Loft has 6' clear to bottoms of main beams, ceiling is about 16'. 18' would be better. Cushioned runner on floor - saves wear on feet Hand me down kitchen oven is useful for preheating stuff, curing paint, etc. Pizza tastes funny, tho. Utility sink, parts washer, cabinet for lubes/paints/resins. The yellow next to the white cabinet is a fire cabinet, mostly for waste fluids, and solvents. Overhead exhaust vent to roof for clearing fumes. (IMG:http://www.blainefabrication.com/projects/2007_12_04/IMG_1820.JPG) (IMG:http://www.blainefabrication.com/projects/2007_12_04/IMG_1821.JPG) This post has been edited by Blainefab: Apr 29 2009, 06:19 PM |
 |
 
|
|
Apr 30 2009, 04:26 PM
Post
#22
|
|
|
Experienced Member Group: Advanced Members Posts: 1,766 Joined: 10-April 04 From: New Orleans, LA Member No.: 303 |
This has to be the most awesome thread ever!
OK, I probably think that because I'm envisioning most of it in MY garage. I think I might go with a metal building. Got some friends in the construction business. For the size of building I'm talking about, they laugh that they can build it with scraps from a large job. Just gotta pay for labor and equipment fees (cranes, etc.). They recommended a spray-on foam-type insulation, with a plastic sheeting for the interior walls. Doesn't need to be painted, is glossy (reflects light), and is almost indestructable. And, best of all, is cheaper than dirt. |
|
|
|
|
Apr 30 2009, 05:54 PM
Post
#23
|
|
|
Advanced Member Group: Advanced Members Posts: 902 Joined: 27-January 04 From: Magnolia, Tx. Member No.: 160 |
Sounds like a good advantage to have. Interestingly enough, in this month's Grass Roots Motorsports is an article about setting up a garage.
|
|
|
|
|
Apr 30 2009, 06:00 PM
Post
#24
|
|
|
Nothing says 'I love you.' like a box of Hydroshoks Group: Moderators Posts: 5,284 Joined: 23-December 03 From: Granbury, TX Member No.: 4 |
QUOTE (00 Trans Ram @ Apr 30 2009, 11:26 AM)  They recommended a spray-on foam-type insulation Over time, the spray on stuff will begin to lose adhesion and fall. I chose batting style insulation and put up interior metal walls |
|
|
|
|
Apr 30 2009, 08:09 PM
Post
#25
|
|
|
Experienced Member Group: Advanced Members Posts: 1,766 Joined: 10-April 04 From: New Orleans, LA Member No.: 303 |
QUOTE (mitchntx @ Apr 30 2009, 01:00 PM) QUOTE (00 Trans Ram @ Apr 30 2009, 11:26 AM) They recommended a spray-on foam-type insulation Over time, the spray on stuff will begin to lose adhesion and fall. I chose batting style insulation and put up interior metal walls Hmmm - good to know. I wonder if old pine needles and dead squirrells make good insulation? |
|
|
|
|
Apr 30 2009, 08:27 PM
Post
#26
|
|
|
Member Group: Advanced Members Posts: 126 Joined: 28-June 07 From: Idaho Member No.: 1,834 |
QUOTE (00 Trans Ram @ Apr 30 2009, 10:26 AM) This has to be the most awesome thread ever! OK, I probably think that because I'm envisioning most of it in MY garage. I think I might go with a metal building. Got some friends in the construction business. For the size of building I'm talking about, they laugh that they can build it with scraps from a large job. Just gotta pay for labor and equipment fees (cranes, etc.). They recommended a spray-on foam-type insulation, with a plastic sheeting for the interior walls. Doesn't need to be painted, is glossy (reflects light), and is almost indestructable. And, best of all, is cheaper than dirt. So what kind of interior walls would you have with this setup? What are you going to mount everything onto? |
|
|
|
|
Apr 30 2009, 08:48 PM
Post
#27
|
|
|
Member Group: Advanced Members Posts: 180 Joined: 20-November 07 From: Bay Area Member No.: 2,011 |
1. Don't know if it was mentioned, but definitely a coated floor for easy cleaning.
2. Paint booth. 3. Some of these (tell your wife it's for authenticity): (IMG:http://farm4.static.flickr.com/3130/2564340939_98d21b240b.jpg) |
|
|
|
|
Apr 30 2009, 10:06 PM
Post
#28
|
|
|
Nothing says 'I love you.' like a box of Hydroshoks Group: Moderators Posts: 5,284 Joined: 23-December 03 From: Granbury, TX Member No.: 4 |
QUOTE (00 Trans Ram @ Apr 30 2009, 03:09 PM) QUOTE (mitchntx @ Apr 30 2009, 01:00 PM) QUOTE (00 Trans Ram @ Apr 30 2009, 11:26 AM) They recommended a spray-on foam-type insulation Over time, the spray on stuff will begin to lose adhesion and fall. I chose batting style insulation and put up interior metal walls Hmmm - good to know. I wonder if old pine needles and dead squirrells make good insulation? For a while, maybe. |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 8th June 2025 - 08:24 PM |