I have the big Griffen radiator and am still running all the factory hoses with a worm clamp on the driver side connection. Its this lower driver side connection that is leaking. Its a slow leak, it only causes problems at WOT...if I do several consecutive runs on autoX or I do a WOT 1/4 type run it spikes and won't cool unless you park it for 30 min. This is as a result of a low coolant level. I check it after these occations and it is always low despite having recently topping it off. I guess it is leaking more than I originally thought. What type of hose/connection can I replace the factory setup with that would prevent leaking? Id like something plug and play that doesn't require fabrication if possible.
Any thoughts?