Full SLP exhaust for 3rd gen and aluminum heads - F-Body Road Racing and Autocross Forums

I don't have them off yet, but I am planning to pull them as soon as is fiscally reasonable. If I can arrange selling them, they'll be off sooner....

I've got the SLP dual cat headers and a dual cat "two on the left" exhaust kit on the car. The cats are not in there and they have been replaced with welded straight pipe. This would probably/possibly have to be cut to get the kit off of the car, but it should be easy enough to clamp back together (either band clamps, a coupler or a welder). I'm wanting to switch to long tubes with some kind of dump. It appears that this car isn't going to see as much street use as I thought it would. I know these kits are getting rare and some of them are bringing "stupid" prices, and I'm not really sure what they are worth, so I'll toss out a number and work from there.

$650 for all of it (local pick up only, or meet me at an event, etc).

I've also got (still on the car) a set of aluminum ZZ3/ZZ4 (Corvette also) cylinder heads. I had these heads built with the engine. I bought raw castings from a friend and had my shop go through them. They have Manley Race-Flo valves in them, K-motion K750 springs, 7/16" screw in studs, comp locks and retainers and guideplates (I forget who's though, it might be Manley). They had a multi angle valve job done, then they were skim cut (to make sure they were flat and true) and the springs were shimmed to spec (130 lbs on seat, 380 fully open). These heads have under 1,000 street miles (probably just a few hundred miles total) on them and 50 minutes (or a bit less) of track time on them.

$675 plus freight

These items are not off of the car yet, but if you're interested in them, let me know and we'll make arrangements to get it all worked out and I'll start pulling the parts as soon as I can. I wanted to get the word out that this stuff is/will be up for sale so nobody can say they weren't warned ahead of time.

(IMG:http://www.frrax.com/rrforum/style_emoticons/default/2thumbs.gif)

trackbird View Member Profile	Jul 13 2007, 02:55 AM Post #1
FRRAX Owner/Admin Group: Admin Posts: 15,432 Joined: 13-February 04 From: Ohio Member No.: 196	I don't have them off yet, but I am planning to pull them as soon as is fiscally reasonable. If I can arrange selling them, they'll be off sooner.... I've got the SLP dual cat headers and a dual cat "two on the left" exhaust kit on the car. The cats are not in there and they have been replaced with welded straight pipe. This would probably/possibly have to be cut to get the kit off of the car, but it should be easy enough to clamp back together (either band clamps, a coupler or a welder). I'm wanting to switch to long tubes with some kind of dump. It appears that this car isn't going to see as much street use as I thought it would. I know these kits are getting rare and some of them are bringing "stupid" prices, and I'm not really sure what they are worth, so I'll toss out a number and work from there. $650 for all of it (local pick up only, or meet me at an event, etc). I've also got (still on the car) a set of aluminum ZZ3/ZZ4 (Corvette also) cylinder heads. I had these heads built with the engine. I bought raw castings from a friend and had my shop go through them. They have Manley Race-Flo valves in them, K-motion K750 springs, 7/16" screw in studs, comp locks and retainers and guideplates (I forget who's though, it might be Manley). They had a multi angle valve job done, then they were skim cut (to make sure they were flat and true) and the springs were shimmed to spec (130 lbs on seat, 380 fully open). These heads have under 1,000 street miles (probably just a few hundred miles total) on them and 50 minutes (or a bit less) of track time on them. $675 plus freight These items are not off of the car yet, but if you're interested in them, let me know and we'll make arrangements to get it all worked out and I'll start pulling the parts as soon as I can. I wanted to get the word out that this stuff is/will be up for sale so nobody can say they weren't warned ahead of time. (IMG:http://www.frrax.com/rrforum/style_emoticons/default/2thumbs.gif)

CMC #37 View Member Profile	Jul 13 2007, 04:32 AM Post #2
CMCer Group: Moderators Posts: 2,932 Joined: 12-February 04 From: the sticks near VIR Member No.: 194	Man, I forked out the big $ for this same set of brand new headers last year! Dang! Great price, someone should snag this stuff quick!

trackbird View Member Profile	Jul 13 2007, 11:53 AM Post #3
FRRAX Owner/Admin Group: Admin Posts: 15,432 Joined: 13-February 04 From: Ohio Member No.: 196	QUOTE (CMC #37 @ Jul 13 2007, 12:32 AM) Man, I forked out the big $ for this same set of brand new headers last year! Dang! Great price, someone should snag this stuff quick! I was thinking that, but I didn't want to accidentally be absurdly high.

02midevil View Member Profile	Jul 15 2007, 12:50 AM Post #4
Member Group: Advanced Members Posts: 105 Joined: 23-September 04 Member No.: 465	PM sent on the ZZ4 heads.