[trackbird]

Ok, I bought the 3rd gen. I should have it at the house in the next few days. Once it's there, many things will be coming off of it (I'll have a better feel for the condition of the parts as I get things off of the car).

Some things I know I'll have for sale (pricing will be added once I see the condition of the stuff as it comes off):

3rd gen 1LE aluminum driveshaft SOLD

1992 Z28 "F40 style" rear wing SOLD

Most of the interior (Console, carpet, headliner, door panels, etc, it's all grey....the front seats are pretty much junk, but the rest might be useful). mostly thrown away

25mm rear suspension techniques sway bar

Eibach Pro Kit rear springs SOLD

Rear KYB shocks SOLD

Glassteck 2" cowl "bolt on" hood pending

Rear hatch pulldown mechanisim (1992 version) SOLD

Spare tire (folding type for a limited slip car) with the "can" of compressed air (it looks unused, but I can't say 100%). Went in the trash

Split folding rear seat and base (grey). This is the two piece folding rear seat. SOLD

Door panels with non cracked top plastic sections (the panels are a bit dirty, but otherwise in decent shape).pending

Grey carpet (dirty, but it looks decent otherwise). SOLD

Steering wheel with airbag. The wheel is pretty worn out and the cover isn't great. But it has a non-deployed air bag in it. SOLD

Front fog lights with decent lenses (I don't see any cracks). SOLD

Rear seat belts (grey) trashed


Things that will be for sale "shortly":

Spohn torque arm with 6 speed (T56) crossmember (it's a crossmember torque arm mount)

Front KYB shocks SOLD

Eibach Pro Kit front springs SOLD

A set of 1992 Z28 wheels (16" alloys, rough shape, but I think they are round enough for track wheels)

Factory oil cooler just the cooler, the lines are damaged


Slightly farther down the road:

And, I may sell the T56/clutch/flywheel/bellhousing/B&M Ripper setup for a Richmond 5 speed in the future (not sure how soon). Or, it might be packaged with the torque arm/crossmember stuff as well.

I've also got an SLP takeout flywheel for an LT1/1 piece rear main seal engine.

Holley Stealth Ram intake system. I think I'm going to change it out for a single plane EFI intake at some point.

[trackbird]

25mm rear suspension techniques sway bar $90 + freight

Glassteck 2" cowl "bolt on" hood pending

A set of 1992 Z28 wheels (16" alloys, rough shape, but I think they are round enough for track wheels)

Factory oil cooler just the cooler and a section of hard line but not all of the lines, the lines are damaged/cut $20 + freight

I've also got an SLP takeout flywheel for an LT1/1 piece rear main seal engine. $50 + freight

Things that I'm still kicking around getting rid of:

T56/clutch/flywheel/bellhousing/B&M Ripper setup. Or, it might be packaged with the torque arm/crossmember stuff as well.

Holley Stealth Ram intake system. I think I'm going to change it out for a single plane EFI intake at some point.

I'd have a Holley Stealth Ram
24 lb SVO (I think) injectors
52mm throttle body (aftermarket, I forget which one)
MSD "dual connector" Pro-Billet distributor

I'm considering swapping to a carb for now and going back to EFI later. When I do the new EFI, I'm not going to use much of this stuff anyway, so I was thinking of selling it now, swapping over and then changing back later on.

Interested in the T56 set-up... Let me know when you are ready to sell.

Still interested? What's a full setup (clutch, flywheel, torque arm, crossmember, driveshaft loop, ripper, T56, bellhousing, I think that's all) worth? I'm keeping the master/slave cylinder and the pedals, the rest would pretty much be included.

I might be interested in the hood. Please email/post some pics of the actual hood once you get the car.

Was it you that E-mailed me? That machine died and I've not heard back from the person who was interested in the hood. I've got another guy interested, but I'm trying to figure out who was the first one to contact me?

What of the 25mm sway bar?
I'm also interested in the oil cooler if no one snags it.

Both are still here.

Do you still have the hood or have you sold it? Need one to replace the junk one thats on mine.

It's still here. Did you E-mail me? Someone did, but who?

Also, I'm adding the two stock TPI fans. I'm keeping the top shroud and I may or may not be able to part with the bottom mount (I forget if anything else is attached to it). $75 + freight for the pair of fans.

[StanIROCZ]

Interested in the T56 set-up... Let me know when you are ready to sell.

Still interested? What's a full setup (clutch, flywheel, torque arm, crossmember, driveshaft loop, ripper, T56, bellhousing, I think that's all) worth? I'm keeping the master/slave cylinder and the pedals, the rest would pretty much be included.

Yes, still interested. I don't need the crossmember, torque arm, or driveshaft loop, but need everything else (or as much as you will sell me). What kind of clutch is it? 1pc rear main or 2pc flywheel? Everything else should include the trans and belhousing, complete clutch, flywheel, shifter, bolts, flywheel cover, and ??? As complete as possible will be easiest for me since I really don’t know what all I need.

How soon you looking to take it out? I'm planning to come down to Nationals so we could plan the exchange for then.

Out of curiosity, why a Richmond 5 speed? Lighter?