![]() |
|
![]() |
![]() |
![]()
Post
#2
|
|
Nothing says 'I love you.' like a box of Hydroshoks ![]() ![]() ![]() ![]() ![]() ![]() Group: Moderators Posts: 5,284 Joined: 23-December 03 From: Granbury, TX Member No.: 4 ![]() |
The stock harness was absolutely hacked to shreds. So, I bit the bullet and used a Painless harness. They offer a "long" version that add's about 2' to the stock length harness. So the harness routes through the stock location.
As it turns out, I am not real happy with that location. Debris collects under and behind that cradle I built. That is also very close to the passenger side exhaust. In this picture ... (IMG:http://www.lawmotorsports.net/mw/stills/Misc/CMC9_RadDuct02.jpg) to the right of the PS reservoir, you can see my forced fan Setrab oil cooler. |
|
|
![]()
Post
#3
|
|
Senior Member ![]() ![]() ![]() ![]() ![]() ![]() Group: Advanced Members Posts: 5,226 Joined: 24-December 03 From: Danville, CA, USA Member No.: 27 ![]() |
The stock harness was absolutely hacked to shreds. So, I bit the bullet and used a Painless harness. They offer a "long" version that add's about 2' to the stock length harness. So the harness routes through the stock location. As it turns out, I am not real happy with that location. Debris collects under and behind that cradle I built. That is also very close to the passenger side exhaust. In this picture ... (IMG:http://www.lawmotorsports.net/mw/stills/Misc/CMC9_RadDuct02.jpg) to the right of the PS reservoir, you can see my forced fan Setrab oil cooler. What kind of Power Steering reservoir did you use? Part number? Thanks, Randy |
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 13th May 2025 - 02:14 AM |