![]() |
|
![]() |
![]()
Post
#1
|
|
Veteran Member ![]() ![]() ![]() ![]() ![]() Group: Advanced Members Posts: 3,323 Joined: 30-March 06 From: Detroit Suburbs Member No.: 1,144 ![]() |
I'm hoping someone has a 4L60e torn apart and sitting in a box in the corner of their garage somewhere.... Or maybe you know someone that does?
I need a couple parts: 40 tooth tone ring - It's pressed onto the outpshaft of the trans. Probably pretty tough to get off, so if you want to send me the whole shaft that's cool. Vehicle Speed Sensor - It's located in the passenger side of the tail housing. These parts can be found in 1993 and newer 2wd trucks and 1994 and newer rear drive cars. This is a long shot but I'm also looking for a DRAC (digital ratio adapter controller) from a 89-94 S10, Astro Vans, and 90-95 full-size trucks. The VSS is wired into this and it conditions and applies a ratio to the signal that goes to the speedo and ECM. Thanks, Stan This post has been edited by StanIROCZ: Apr 23 2008, 09:42 PM |
|
|
![]() |
![]()
Post
#2
|
|
Full NVH ![]() ![]() Group: Moderators Posts: 444 Joined: 16-July 07 From: Grove City, Ohio Member No.: 1,854 ![]() |
Dad couldn't find a tone ring in the shop. He was going to look in the building where the cores are and let me know. He thought he could get it through Transtar (our trans parts supplier). I will let you know when I hear from him. Are you using a 4l80e in something?
|
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 9th July 2025 - 01:19 AM |