![]() |
|
![]() |
![]()
Post
#1
|
|
LS1 Inside! / Toolbox / Mechanical Engineer ![]() ![]() ![]() Group: Advanced Members Posts: 2,215 Joined: 5-February 04 From: NJ Member No.: 179 ![]() |
I'm getting ready to epoxy coat the garage floor and am trying to completely prep a few oil spots. Most of the oil is gone, but water still beads slightly. I've tried Simple Green, and I used a power washer on the weekend. I'm looking for something a bit stronger. Any recommendations?
|
|
|
![]() |
![]()
Post
#2
|
|
Veteran Member ![]() ![]() ![]() ![]() ![]() Group: Advanced Members Posts: 3,897 Joined: 3-July 04 From: Pearland, Texas Member No.: 385 ![]() |
I'm getting ready to epoxy coat the garage floor and am trying to completely prep a few oil spots. Most of the oil is gone, but water still beads slightly. I've tried Simple Green, and I used a power washer on the weekend. I'm looking for something a bit stronger. Any recommendations? Have you tried muriatic acid to see if that cleans it enough? You have to use that before you paint anyway. I think that's all I did when I did my cheapy paint job 10 years ago. I may have used some lacquer thinner on the tough spots, but that was about it, IIRC. |
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 9th August 2025 - 02:23 AM |