[Sam Strano]

I'm now happy to announce we can take pre-orders on a Watts Link for all 82-02 F-bodies with stock diamter axle tubes. There is a version for bigger axle tubes (suck as 12-bolts, etc.) in the works.

They should be ready to ship in approximately 2-3 weeks. The unit is made by Fays2 who has been doing these for Mustangs for more than a few years. I not only trust the unit and have had all my questions answered, but will be putting one on my car as soon as possible. Jim and I have had a few discussions about the design and I'm happy to say he addressed my main concerns regarding approximate roll-center height. I wanted to make sure we could start @ stock height and adjust down as the owner sees fit. That has been done and implimented in this unit.

Details, specs and a photo on a 4th gen can be seen here:
http://www.stranoparts.com/partdetails.php...7&ModelID=7

(IMG:http://www.stranoparts.com/data/images/p30617181655.jpg)


Price is $650 Plus shipping. Shipping costs will normally not exceed $30 in most cases.

Fays2 own website has the pricing set lower, but after a discussion with Jim Fay, he informed me the prices are incorrect and will be changed.

[Sam Strano]

Good news:

"Sam,
I just met with the welder, sandblaster and powder coater.
Welding is promised for Tuesday morning.
We are FINALLY!!!!!!!!!!!! on schedule to ship next Friday."

That's a quote from Fays2.

[Rampant]

Good news:

"Sam,
I just met with the welder, sandblaster and powder coater.
Welding is promised for Tuesday morning.
We are FINALLY!!!!!!!!!!!! on schedule to ship next Friday."

That's a quote from Fays2.

Has there been any talk of one for a 12 bolt yet? I know it was mentioned but for a later date.

I will be seriously looking at one for mine.

I can get dimensions if they need them and photos. The car is just a roller right now waiting to put the 36mm front bar on you sent me. Well it is actually waiting for the motor.

[tpunk]

Good news:

"Sam,
I just met with the welder, sandblaster and powder coater.
Welding is promised for Tuesday morning.
We are FINALLY!!!!!!!!!!!! on schedule to ship next Friday."

That's a quote from Fays2.

Has there been any talk of one for a 12 bolt yet? I know it was mentioned but for a later date.

I will be seriously looking at one for mine.

I can get dimensions if they need them and photos. The car is just a roller right now waiting to put the 36mm front bar on you sent me. Well it is actually waiting for the motor.

I was under the impression that all that needed to be changed was the clamps for the axle housing. If this is so then I would think it would be easy for them to sell you the corresponding part if you measure it correctly.

I assume we can expect a review from you (Sam) pretty soon after you get this on your car right (IMG:http://www.frrax.com/rrforum/style_emoticons/default/wink.gif) . Also, I noticed that you said black will be an option on this first batch but will it continue to be an option later on? Doesn't really matter too much, just curious.