[Blainefab]

Car in question is here: http://www.frrax.com/rrforum/index.php?showtopic=13432

edit: Part out is ON!, buy them now!

I need to get this car out of my garage and into my wallet. Not a bite yet on the for sale, so I'm considering parting it out. I'm not committed yet to parting it out, so let me know if there is any serious interest in these items. If there ends up being a feeding frenzy I'll give first responders first dibs on items. All prices + tax in CA/shipping/truck freight. If this goes off, maybe can get stuff to Miller NASA Nats cheaply

Here goes:

edit - prices lowered again!

motor $4000 $3500 $3000 $1500
.030 over LT1, 355 cu in
OEM short block rebuilt and balanced by Doug Rippie Motorsports
heads ported by Doug Rippie Motorsports and Mike Blackstone
LT4 extreme duty timing set
Ultradyne 232/244 110ls cam
Comp Cams ChroMo 1.6 roller rocker arms
Crane double valve springs, titanium retainers
Manley pushrods
ported intake manifold, BBK 58mm TB
#30 injectors no injectors
vented Opti upgrade
Taylor wires over the valve covers with boots
fresh OEM starter, alternator
Canton roadrace oil pan
PCM with dyno tuned flash
OEM wiring harness, MAF, all sensors, water pump
Dyno 373rwhp @ 6000rpm, 347rwtq @ 4600rpm

trans $1500 $1300 SOLD!
T-56 1993 with the good 5th gear. shifts fine

Axle assy $1000 $900 SOLD!
OEM 10bolt, has a couple tenths neg camber, zero toe
Motive 3.73
Moser axles (from before Moser went to crap)
Auburn racers diff
AAM cooler cover
GW LCA drop brackets
vent plumbing and catch can
LT1 brakes included
ARP studs

rear hatch with Lexan $300 $250 Lexan SOLD!
Five Star 3/16" Lexan with 3 internal ribs. Doesn't budge at 190mph

Fuel cell $300 $250
Fuel Safe 22gal ProCell
aluminum can, shoebox style
vent plumbing
ball valve surge tank
swirl pot de-aerator
2ea 2gal displacment blocks for 18gal
NEEDS NEW BLADDER and FOAM. Not included, but I'm a Fuel Safe dealer and can give buyer a good price and put it all together, ready for install.

Fuel pump/filter $200 $150 SOLD!
Aeromotive A1000 external pump with 12304 suction side filter, screws directly onto pump. Buy it with the fuel cell and I'll include -10AN plumbing to the cell

rear diffuser $300
custom Blainefab
no guarantees or claims for downforce, but it looks bitchin, and quiets the car

pin on doors $150ea
skin only, includes hardware to bolt on. 20# (each side) lighter than typical gutted doors.

exhaust $1200 $250 headers only SOLD
complete system, needs pass pan cut out and boxed for clearance. Clears big CF ds. Tucks up well, collectors are lowest point.
Hooker long tube headers with custom skid plates, Jet-Hot ceramic coated
custom 2.75" Ypipe to 4" intermediate pipe, dump ahead of axle SOLD!
includes tailpipe with 4" race Flowmaster, 99dB at Laguna SOLD!
includes tailpipe 3" Truck/RV Flowmaster, 91dB at Laguna SOLD!

clutch $200 SOLD!
all parts fresh before final season
OEM flywheel
OEM LT4 PP/TOB
McLeod dual friction disc

Hood $280 EXPIRED!
Blaine Fab fiberglass 18#

rolling chassis $1500 $1200 Includes pin on doors and fuel cell
stripped
straight, never wrecked
CA car, no rust
8pt cage, thru firewall. Blainefabs first cage, it is stout but not as pretty or roomy as my current work. I'll give buyer a good deal on a new cage.

Shocks $350 set SOLD!
Koni singles front
Koni doubles rear

springs $75 pr SOLD!
850# x 8" tall 2.5" ID

coilovers $120 SOLD!
Global West, springs not included

CF roof panel $250 SOLD!
Blaine Fab carbon fiber 5#

CF driveshaft $400 SOLD !
ACPT carbon fiber ds

wheels 17 x 11 $1000 set of 4 SOLD!
real GM Grand Sport. black. 19.X#

wheels 17 x 9.5 $800 set of 4 SOLD!
real GM ZR1 fronts. silver 19.X#

wheels 17 x 9 $350 set of 4 SOLD!
real GM early LT1 SS. silver 19.x#

Scanmaster LT1 $100 SOLD!
LT1 specific realtime display of a bunch of engine parameters

Oil cooler $350 SOLD!
Setrab TOC300 oil/water heat exchanger
sandwich plate
steel filter adapter
support bracket
all oil and water plumbing
fits Canton pan/Hooker long tubes/OEM radiator

edit: added ARP studs to axle
edit: added shoebox to cell
edit: added MAF, all sensors, water pump to motor

This post has been edited by Blainefab: Jun 28 2011, 08:11 PM

[2002z28ssconv]

32708

Do the factory struts come with load bearings that will transfer over to these?
I've only had mine off twice. Once about 4 years ago and once about 6 years ago.

Needless to say, I don't recall their assembly details off the top of my head.

What shocks were you using with these? I still have the stock Decrapons but hey... they've got over 100,000 miles of abuse so I guess I should be nicer with their description. Planning on upgrading when I add the coilovers. Want to make sure I get ones that will fit.

[Blainefab]

32708

Do the factory struts come with load bearings that will transfer over to these?
I've only had mine off twice. Once about 4 years ago and once about 6 years ago.

Needless to say, I don't recall their assembly details off the top of my head.

What shocks were you using with these? I still have the stock Decrapons but hey... they've got over 100,000 miles of abuse so I guess I should be nicer with their description. Planning on upgrading when I add the coilovers. Want to make sure I get ones that will fit.

UPS gnd shipping is $15, PayPal $135 to: ablaine@cruzio.com

The radial bearings are not OEM, I'm not sure they were part of the GW package when I got these, but If I have them they'll be included. They make it a little easier to adjust the spring height when the suspension is loaded. Without them it just takes more effort.

I was using Koni singles, I had Bilsteins in the past. They will fit OEM but definitely recommend upgrading.

I am a dealer for Koni/Bilstein shocks and AFCO/Eibach/QA1 springs, would be glad to quote you on a package with new off the shelf shocks/springs.

This post has been edited by Blainefab: Sep 30 2009, 09:00 AM