[Racing Geek]

I'll be picking up a pair of Z06 wheels tonight so I'll be needing a pair of 2" spacers to make them fit up front. I may need them for the back too, but I'm also trying to find a 4th gen rear end so I was planning on holding off with a second pair for now. Let me know what you have.

Mike

[slowTA]

My hubcentric eBay spacers just barely didn't fit on the rear. The center bore was about .010" too small. I was able to use a friend's lathe to fix that. But on the front they weren't even close. The step inside the adapter was way too shallow and sat a good half inch off the face of the rotor.

Also the center bore on my rims are bigger than the adapter so the wheel is lug centric anyway.

Now I'm a little bummed that 17's may not fit with a spacer smaller than 2", maybe I'll try a narrow 17" rim and cross my fingers.