![]() |
|
![]() |
![]()
Post
#1
|
|
Advanced Member ![]() ![]() Group: Advanced Members Posts: 256 Joined: 13-January 04 From: Tucson, AZ Member No.: 123 ![]() |
Looking for 1 or 2 (I have 1 broken, wouldn't mind a spare) of the center vents. All 93-02 Firebird/TA center vents are compatible. The LH and RH side vents carry a different part #.
Dealer wants $18 each for these. I'm hoping someone has some laying around from a car build and will let them go on either a PIF (pay shipping) basis or for a more reasonable price. Thanks, Jeff |
|
|
![]() |
![]()
Post
#2
|
|
Advanced Member ![]() ![]() Group: Advanced Members Posts: 256 Joined: 13-January 04 From: Tucson, AZ Member No.: 123 ![]() |
Let me check my Helms manual when I get home - I haven't tried removing my broken one yet (missing a couple fins)
|
|
|
![]()
Post
#3
|
|
Member ![]() Group: Advanced Members Posts: 126 Joined: 12-March 09 From: GA Member No.: 4,353 ![]() |
Let me check my Helms manual when I get home - I haven't tried removing my broken one yet (missing a couple fins) When I removed mine I broke 2 out of the 3... granted I didn't care if I broke them so I wasn't being very careful. The one I did not break I simply disassembled the vent before I removed it. I took the vent adjustment tab off, then removed the vent flaps. Then you can pull the housing out. I had my dash out when I did this so that made it easier. After you have it out you can just reassemble it. Hope this helps. |
|
|
![]()
Post
#4
|
|
Member ![]() Group: Advanced Members Posts: 42 Joined: 29-January 10 From: South Jersey Member No.: 8,181 ![]() |
Let me check my Helms manual when I get home - I haven't tried removing my broken one yet (missing a couple fins) When I removed mine I broke 2 out of the 3... granted I didn't care if I broke them so I wasn't being very careful. The one I did not break I simply disassembled the vent before I removed it. I took the vent adjustment tab off, then removed the vent flaps. Then you can pull the housing out. I had my dash out when I did this so that made it easier. After you have it out you can just reassemble it. Hope this helps. Okay. I'll try that. With my work schedule I won't have time to do it until Friday. I'll let you know how I make out. |
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 17th May 2025 - 02:34 PM |