[Blainefab]

Wheel spacers for F/Y bod, used but excellent condition:
1pair 3/8" thick center hose sized for LT1 rear $40 SOLD
1pair 1/2" thick sized for LS1 rear, any front $50 SOLD
1pair 3/4" thick sized for LS1 rear, any front $75 SOLD

Lugnuts still available, scroll down for pic

Blainefab can add lightening holes and/or open up center hole for LT1 rear - inquire for pricing

Must not be used with OEM wheel studs - a stud upgrade is required to use the spacers. I also have stock of ARP wheel studs and Gorilla short bulge lugnuts.

http://www.frrax.com/rrforum/index.php?showtopic=10330

(IMG:http://www.blainefabrication.com/projects/2011_10_08/IMG_4583.JPG)

This post has been edited by Blainefab: Oct 21 2011, 07:01 AM

[Blainefab]

PayPal received on the 3/8" spacers.

That leaves the 3/4" spacers. I made this set for Kens T/A - it widened the track to make full use of the eyebrow flares and 12.5" rims with 320/18 Yokos. He doesn't need them anymore with the 7.6" bs Welds.

Would be useable with 275 on 9.5" rims, too, to get an extra 1/2" of track width over the rest of the field that are mostly using my 1/2" spacers.

I don't plan to make these as a standard product, the 3/4" plate 6061 is just too expensive, and with the extra long studs required gets kinda pricey. One-off builds will be expensive, get these while they are cheap.

These are thick enough that the longer 3.25" long ARP studs are required - retail on those is $31/5pack.

I'll bundle a package together that will work on front or rear of any 4th gen - let me know if they are going on an LT1 rear and I'll open up the ID no extra charge.

the pair of used 3/4" spacers
two 5packs of new ARP-100-7713 studs
10 new Dorman bulge lugnuts

total $140 + shipping and tax if CA

add $25 if you want me to add lightening holes - would remove 16oz total of unsprung weight

This post has been edited by Blainefab: Oct 18 2011, 07:57 AM