Wheel spacers for F/Y bod, used but excellent condition:
1pair 3/8" thick center hose sized for LT1 rear $40 SOLD
1pair 1/2" thick sized for LS1 rear, any front $50 SOLD
1pair 3/4" thick sized for LS1 rear, any front $75 SOLD

Lugnuts still available, scroll down for pic

Blainefab can add lightening holes and/or open up center hole for LT1 rear - inquire for pricing

Must not be used with OEM wheel studs - a stud upgrade is required to use the spacers. I also have stock of ARP wheel studs and Gorilla short bulge lugnuts.

http://www.frrax.com/rrforum/index.php?showtopic=10330

Think the 3/8 ones will fit over a C4 rear knuckle? I'd like to space the C5 Z06(with hoosier race rubber) rears out just a tad, these would do just the trick. I'm assuming you've used these with no issues in competition, so they should be fine for my track days and time trials.

I'll have to check tomorrow, I have a C4 rear hub at the shop. I'm pretty sure it will be the same as the C5 and the LS1 4th gens, tho. If so, the 3/8 would be too large and the 1/2 and 3/4 would fit. I'll let you know.

All have been used in competition, with ARP studs, with no issues related to the spacers. The Weld wheels that we are using on the car now do not need any spacers, and it looks like Weld is solidly behind us, long term. These spacers have just been taking up space in the spares bin.

I'll take the pair of 1/2"ers off your hands. PM me with payment info.

I'm thinking about the 3/8s for the LT1, but I need to do some measuring first. How much for the studs and how tough to change them out?

Steve

PM sent

1meanZ has first crack at the 3/8, I gotta remember to check the C4 hub fitment tonite. If he doesn't buy them they would work on the rear of your LT1 axle.

BlaineFab price on ARP 2.5" long studs is $16/5pack and on the Dorman open bulge lugnuts is $16/10pack

Thanks Alan, I returned a PM just to confirm everything.

I remembered to check - the C4 rear hubs are the same as the 4th gen fronts and C5, so the 3/8" spacer would be too large. The only place they will go is a LT1 rear.

I have new 3/8" spacers in stock, properly sized for the C4 rear.

Also, FWIW, I have a pair of 86 C4 rear knuckle/hub assemblies. This is the early suspension, I don't know if the knuckles are different than 88 up, but I do have an 88 C4 in the shop so if you need spares I could take some measurements and see if these would fit.

unless there is a failure path that I'm not familiar with, I hope I don't need spare knuckles. 2-3 track days and lots of street driving shouldn't be too much abuse LOL. They changed the offset somewhere in there and I think the knuckles are different. I'm using a 96 D44 so obviously it's the late version. I'll hold off on spares for now but you'll be my first call if I need something.

Sell the spacers to others interested, per our PM I'll order new ones once I measure again to verify the space I need. I'm also running ARP studs and open end lug nuts so no worries on the spacers.

Thanks Alan.

Steve - The 3/8" spacers are yours if you want them. The OEM studs press out with a tie rod end puller, or a big Cclamp and socket. The ARPs pull into the flange the same way, or with a lug nut and washers. The trick in the rear is getting the length of the stud past the backing plate - it may be necessary to unbolt the brakes and backing plates to get them past.

I'll take them. Are the lug nuts necessary? I've already got two sets. One set is the stock lugs, that are open on both ends, and then the set that came with my chrome ZR1 replicas, which are chrome, and closed on one end.

Steve

PayPal received on the 3/8" spacers.

That leaves the 3/4" spacers. I made this set for Kens T/A - it widened the track to make full use of the eyebrow flares and 12.5" rims with 320/18 Yokos. He doesn't need them anymore with the 7.6" bs Welds.

Would be useable with 275 on 9.5" rims, too, to get an extra 1/2" of track width over the rest of the field that are mostly using my 1/2" spacers.

I don't plan to make these as a standard product, the 3/4" plate 6061 is just too expensive, and with the extra long studs required gets kinda pricey. One-off builds will be expensive, get these while they are cheap.

These are thick enough that the longer 3.25" long ARP studs are required - retail on those is $31/5pack.

I'll bundle a package together that will work on front or rear of any 4th gen - let me know if they are going on an LT1 rear and I'll open up the ID no extra charge.

the pair of used 3/4" spacers
two 5packs of new ARP-100-7713 studs
10 new Dorman bulge lugnuts

total $140 + shipping and tax if CA

add $25 if you want me to add lightening holes - would remove 16oz total of unsprung weight

I'm adding a set of 21 lugnuts - closed end, rather deep (1.6") from very end. The thread is std late GM 12mm x 1.5, conical seat, but they have a sleeve extending thru the wheel hole. They seem to fit fine on the Welds. Chrome finish, 21 ea (ya, I don't know why - a miscount maybe). They are new, never had a wrench on them. They are clean but a little dull, been in a bag upstairs for about 5yrs. I just wiped the top one off with a paper towel and it shines. $20

All the spacers are sold, but the shiny lugnuts are still available.

Still got these pimpin lugnuts - they'd make a killer slingshot load $15