[198esp]

I had these konis built about 4 years ago, They have off the shelf koni yellow SA valving in them. I cant remember exactly but they are a couple pounds lighter than the typical koni ground control set up. Shocks cost aaround 600 for the pair. The shocks can be sent to koni and have just about any valving you like or could be made into a DA shock or run The way they are. If you have any questions just shoot me a pm. custom koni are the 3rd pic down

1.Front coilovers w/out springs 300
2.eibach 550lbs/10/2.50 50.
3. hypercoil 850/10/2.5 75.
4. rear koni SA need rebuild 50/obo
6. afco 5inch 225 40/obo
(IMG:http://i35.photobucket.com/albums/d184/hsensi/010-4.jpg)


(IMG:http://i35.photobucket.com/albums/d184/hsensi/008-4.jpg)

(IMG:http://i35.photobucket.com/albums/d184/hsensi/007-7.jpg)

(IMG:http://i35.photobucket.com/albums/d184/hsensi/006-3.jpg)

[198esp]

The coilover adapter is from my local circle track shop. The top one is welded to the stock upper mount. The lower one is the same as the upper but is welded to a plate that bolts to the stock location on the lower control arm. The one I used is like D, I think they are 5.00 bucks you can get them at any circle track shop or coleman racing or howell racing

(IMG:http://howeracing.com/images/PRODUCT/large/ShockMounts.png)