[pharmd]

Anyone have an guidance on a steering wheel adapter (possibly quick release) for a sparco 345 suede wheel?

Also what oil cooler setup are most of you guys running? Do you feel it necessary to run any other coolers as well (tranny, diff etc)?

Thanks in advance.

[Blainefab]

Anyone have an guidance on a steering wheel adapter (possibly quick release) for a sparco 345 suede wheel?

Thanks in advance.

I sell this splined, bolt on QD, and fab the 3bolt to 6bolt adapter:

(IMG:http://www.blainefabrication.com/projects/2006_11_20/IMG_0871.JPG)

(IMG:http://www.blainefabrication.com/projects/2006_11_20/IMG_0872.JPG)

(IMG:http://www.blainefabrication.com/projects/2006_11_20/IMG_0873.JPG)

Except now I'm drilling more holes in the adapter and countersinking the 3 bolts flush, like this:

(IMG:http://members.cruzio.com/~ablaine/IMG_2299.JPG)

You'll lose the airbag. If you have a horn button with your wheel, I can make a spacer so it fits, you will need to wire an electrical tether for it.

[pharmd]

Anyone have an guidance on a steering wheel adapter (possibly quick release) for a sparco 345 suede wheel?

Thanks in advance.

I sell this splined, bolt on QD, and fab the 3bolt to 6bolt adapter:

(IMG:http://www.blainefabrication.com/projects/2006_11_20/IMG_0871.JPG)

(IMG:http://www.blainefabrication.com/projects/2006_11_20/IMG_0872.JPG)

(IMG:http://www.blainefabrication.com/projects/2006_11_20/IMG_0873.JPG)

Except now I'm drilling more holes in the adapter and countersinking the 3 bolts flush, like this:

(IMG:http://members.cruzio.com/~ablaine/IMG_2299.JPG)

You'll lose the airbag. If you have a horn button with your wheel, I can make a spacer so it fits, you will need to wire an electrical tether for it.

Alan PM me a price for this with the spacer for horn. And do you have any other fire extinguisher mounts besides the roll bar mount?

[Blainefab]

Alan PM me a price for this with the spacer for horn. And do you have any other fire extinguisher mounts besides the roll bar mount?

PM sent on QD

I usually use rivnuts that have fingers that spread out on the backside, with a fender washer captivated by the fingers, and attach the bracket right onto the pan or tunnel, wherever there's enough flat space. The rollbar mount gives some other options if the space near the driver is full of other stuff.

I can make something custom at a reasonable price, too. Let me know what you are looking for.