MSD distributor 6AL box and coil - F-Body Road Racing and Autocross Forums

I have an MSD Pro Billet small cap distributor for an '87 and up Chevrolet V8. I bought a new one for the Camaro after we completed the cage. It has less than an hour of run time on it and was only used to warm up the engine a couple times and load it on a trailer to store it for a bit. Excellent condition.

$235 plus freight

It's this one:

http://www.jegs.com/i/MSD-Ignition/121/836...Id=#moreDetails

I have an original MSD 6AL. I extended the wires to the coil (with 600 Volt rated wire, solder joints are covered with double heat shrink with sealer). I still have the box and the bag of hardware that came with it. Very good to excellent condition.

$160 plus freight

MSD Blaster SS coil, excellent condition and includes the vibration isolators as shown in the link. This coil makes slightly less voltage than some of the others (but 40k volts is plenty) but if you look at the ratings, it makes roughly double the current of the other coils which makes for a much hotter spark. It's a much better coil overall than most of the other coils (including the MSD regular Blaster and Blaster II, etc).

$30 plus freight

This one:

http://www.jegs.com/i/MSD+Ignition/121/8207/10002/-1

I just ordered a new HEI for the Corvette so this stuff isn't needed. I'll gladly combine freight on stuff. If you need it, make me an offer. Pics on request.

Thanks!

trackbird View Member Profile	Apr 30 2014, 02:11 PM Post #1
FRRAX Owner/Admin Group: Admin Posts: 15,432 Joined: 13-February 04 From: Ohio Member No.: 196	I have an MSD Pro Billet small cap distributor for an '87 and up Chevrolet V8. I bought a new one for the Camaro after we completed the cage. It has less than an hour of run time on it and was only used to warm up the engine a couple times and load it on a trailer to store it for a bit. Excellent condition. $235 plus freight It's this one: http://www.jegs.com/i/MSD-Ignition/121/836...Id=#moreDetails I have an original MSD 6AL. I extended the wires to the coil (with 600 Volt rated wire, solder joints are covered with double heat shrink with sealer). I still have the box and the bag of hardware that came with it. Very good to excellent condition. $160 plus freight MSD Blaster SS coil, excellent condition and includes the vibration isolators as shown in the link. This coil makes slightly less voltage than some of the others (but 40k volts is plenty) but if you look at the ratings, it makes roughly double the current of the other coils which makes for a much hotter spark. It's a much better coil overall than most of the other coils (including the MSD regular Blaster and Blaster II, etc). $30 plus freight This one: http://www.jegs.com/i/MSD+Ignition/121/8207/10002/-1 I just ordered a new HEI for the Corvette so this stuff isn't needed. I'll gladly combine freight on stuff. If you need it, make me an offer. Pics on request. Thanks!

trackbird View Member Profile	May 13 2014, 07:38 PM Post #2
FRRAX Owner/Admin Group: Admin Posts: 15,432 Joined: 13-February 04 From: Ohio Member No.: 196	QUOTE (trackbird @ Apr 30 2014, 10:11 AM) I have an MSD Pro Billet small cap distributor for an '87 and up Chevrolet V8. I bought a new one for the Camaro after we completed the cage. It has less than an hour of run time on it and was only used to warm up the engine a couple times and load it on a trailer to store it for a bit. Excellent condition. $200 plus freight It's this one: http://www.jegs.com/i/MSD-Ignition/121/836...Id=#moreDetails Ok. $200 on the distributor. I can't see me using it anytime soon, so it may as well find a good home. That's a distributor in excellent condition (virtually new) for about $100 off. Anyone?