[SS Performance]

The intake I am installing on my 02 Camaro requires that I remove the passenger side windshield wiper. I would like to keep the drivers side wiper.

The linkage from the wiper motor goes to the passenger side wiper then to the drivers side. So remove the passenger side disables the drivers side.

Is it possible to run the linkage directly from the motor to the drivers side wiper? Can I index the motor and wiper to accomplish this? How long does the linkage need to be?

Or do I need to change to a different wiper motor and if so which one? And how does it mount?

By the may this car will see some street use as well as some track days HPDE and such.

I'm sure someone has done this so any help would be great.

Thanks
Craig

[SS Performance]

On the 02 I'm using a Edelbrock Super Victor with a 4150 style throttle body.

The throttle body sits about where the passenger side wiper mounts.

On my 99 I'm using a Holley Hi-Ram.

So same wiper issue different intakes.

I can completely remove the wipers but I would like to keep the drivers side on both cars. I would not like to be caught in the rain with no wiper.

[Blainefab]

I can completely remove the wipers but I would like to keep the drivers side on both cars. I would not like to be caught in the rain with no wiper.

I don't have a car with wipers at the shop, but if I'm recalling the layout correctly, the passenger side pivot assy could be relocated towards the drivers side, and the arms shortened to fit.

Might be a more elegant way to do it directly from the drivers side but I'd need to see the whole assy in place to figure that out.