[slowTA]

Apparently it's time to start selling off a bunch of the stuff I've been hanging on to so here's a list. Everything is best offer, shipping will be from the North Jersey area.

Set of 315/30-18 A6 Hoosiers, 4313 build date
3rd gen Hotchkis springs
Alston subframe connectors
Two sets of TPI parts 1 set '88 and older the other is '89 and newer. The newer set must be cleaned thoroughly since it was on the motor when it blew up, tiny chunks of piston went EVERYWHERE, from the air filter to out the exhaust.
Intake track for TPI with air filter on the passenger side, Firebird style.
24 lb blue top injectors
small block balancer
serpentine belt set up
305 with roller cam
distributor
MAF computer with chip socket
4th gen 10 bolt rear (modified for lower panhard bar and screw jacks)
3rd gen Australian 9 bolt
Cast iron rear calipers (lol, I should trash these!)
3rd gen heater core
Gray interior panels (everything but door panels)
black TA ground effects
orange Firebird driver door and formula hood
white Firebird fenders
third gen wheels (everything with proper offsets):
1 set of Formula 16x8
1 set of the typical mid '80 Pontiac design (same look found on Fieros and Grand Ams etc.) 16x8
1 set of circle racing light weight stamped aluminum wheels 16x9.5
3rd gen gas tank (no pick up or pump)
4th gen metal gas tank (no pick up or pump)
3rd gen front impact support (bumper and egg crate thing)
One 245/50-16 Cooper tire! (something else I should dump)
10 bold aluminum diff cover (not sure what brand, but will find out)
small block 1.6 roller tipped rockers, screw in studs, and poly locks
black with red chevy bow tie timing chain cover
TPI corvette valve covers
Summit/Jegs mini starter
black front and rear firebird (base and formula) bumper covers

I'm sure there is more I'll find while sorting through all this. Please ask for pictures!

This post has been edited by slowTA: Oct 14 2016, 02:12 AM

[slowTA]

Bolt on, but easy to weld.

http://www.thirdgen.org/forums/suspension-...e-question.html