48 row oil cooler with fan, brackets and shroud $100 - F-Body Road Racing and Autocross Forums

This setup is lightly used, I built it for a Subaru Sti, my customer did a couple track days with it, then got a job with Ebay and parked the car. Probably less than 10hrs run time on it - motor was fine so it should be clean but best to thoroughly clean any used oil cooler before putting back into service.

Cooler is a stacked plate 48 row, 11" x 11" x 1.5", the brand name is under a bracket, it says made in Canada. It's probably a B&M or Derale. Ports are 1/2" NPT, fittings are -10AN.

Fan is 12" dia Permacool, brackets and partial shroud are custom Blaine Fab. The whole fan/cooler/shroud assy is about 16" tall by 12" wide x 4-1/4" thick, could be adapted to fit a variety of other radiators, or used as a stand alone. New cost on the cooler and fan is about $215, I'm asking ~~$130~~ plus shipping - that includes the brackets, AN fittings, cooler and fan, but not the radiator. How about $100

It is currently mounted on an aftermarket aluminum Sti (I think it was a 2005 model) radiator, which is not included, but if you need the radiator too, let me know and I'll get details on it and cut a good deal.

(IMG:http://blainefab.com/projects/2016-08-09/1-004.JPG)

This post has been edited by Blainefab: Sep 25 2017, 10:14 PM

Blainefab View Member Profile	Aug 10 2016, 04:22 AM Post #1
I build race cars Group: Advanced Members Posts: 4,748 Joined: 31-August 05 From: Central coast, CA Member No.: 874	This setup is lightly used, I built it for a Subaru Sti, my customer did a couple track days with it, then got a job with Ebay and parked the car. Probably less than 10hrs run time on it - motor was fine so it should be clean but best to thoroughly clean any used oil cooler before putting back into service. Cooler is a stacked plate 48 row, 11" x 11" x 1.5", the brand name is under a bracket, it says made in Canada. It's probably a B&M or Derale. Ports are 1/2" NPT, fittings are -10AN. Fan is 12" dia Permacool, brackets and partial shroud are custom Blaine Fab. The whole fan/cooler/shroud assy is about 16" tall by 12" wide x 4-1/4" thick, could be adapted to fit a variety of other radiators, or used as a stand alone. New cost on the cooler and fan is about $215, I'm asking ~~$130~~ plus shipping - that includes the brackets, AN fittings, cooler and fan, but not the radiator. How about $100 It is currently mounted on an aftermarket aluminum Sti (I think it was a 2005 model) radiator, which is not included, but if you need the radiator too, let me know and I'll get details on it and cut a good deal. (IMG:http://blainefab.com/projects/2016-08-09/1-004.JPG) This post has been edited by Blainefab: Sep 25 2017, 10:14 PM

CrashTestDummy View Member Profile	Oct 11 2017, 03:58 PM Post #2
Veteran Member Group: Advanced Members Posts: 3,874 Joined: 3-July 04 From: Pearland, Texas Member No.: 385	Looks good. Still not sure what I'll do with it, but the price was right. The picture didn't do the size justice. It's bigger than it looks in the picture above. Thanks, Alan!