Cheap Chinese cr@P! - F-Body Road Racing and Autocross Forums

:set rant=ON

While chasing a rattle in the back of the B4C, I noticed that the rear bump stops had deteriorated. Much like the spats on our 86 SVO, they just fell to the floor of the shop in crumbly pieces. Looking around, I discovered that the poly replacement pieces require you to cut part of the mounting surface away from the body. Not willing to do that, this IS a mostly-stock B4C 1LE car, I opted to just use factory replacements.

It looks like Dorman is the only co that has anything that's not poly for the 3rd Gen, P/N 31068, so I ordered a pair of these, not cheap, repros. I decided today was the day to do that, and after getting the back end off the ground and the wheels off, went to work. Being a mostly unmolested Texas car, the bolts came off will little effort, albeit more than I wanted to do, given my current state of rehab from shoulder surgery. Anyway, I started to bolt the new ones in place, and the freaking bolt holes don't line up with the body!!!!! I verified the P/N, but sure enough, the bolt holes are about 1/8-3/16" off. After drilling the holes out to 1/2" and slotting them with my die grinder, I got them on the car.

I'm really p1ssed that these things pass off as OEM replacements. It's not like I'm trying to fab a part for some rare, odd car. I can't wait to get my 'we'd love you to review your purchase' email from the reseller!!! (IMG:style_emoticons/default/dry.gif)

The rattle, BTW, was a mis-assembled rear sway bar end link. I don't remember when, or who did the work, it was certainly me, with, or without help. Who knows. It's all better now. THAT sh1t fit!

:set rant=OFF
<return>

This post has been edited by CrashTestDummy: Jun 15 2023, 09:11 PM

CrashTestDummy View Member Profile	Jun 15 2023, 09:10 PM Post #1
Veteran Member Group: Advanced Members Posts: 3,874 Joined: 3-July 04 From: Pearland, Texas Member No.: 385	:set rant=ON While chasing a rattle in the back of the B4C, I noticed that the rear bump stops had deteriorated. Much like the spats on our 86 SVO, they just fell to the floor of the shop in crumbly pieces. Looking around, I discovered that the poly replacement pieces require you to cut part of the mounting surface away from the body. Not willing to do that, this IS a mostly-stock B4C 1LE car, I opted to just use factory replacements. It looks like Dorman is the only co that has anything that's not poly for the 3rd Gen, P/N 31068, so I ordered a pair of these, not cheap, repros. I decided today was the day to do that, and after getting the back end off the ground and the wheels off, went to work. Being a mostly unmolested Texas car, the bolts came off will little effort, albeit more than I wanted to do, given my current state of rehab from shoulder surgery. Anyway, I started to bolt the new ones in place, and the freaking bolt holes don't line up with the body!!!!! I verified the P/N, but sure enough, the bolt holes are about 1/8-3/16" off. After drilling the holes out to 1/2" and slotting them with my die grinder, I got them on the car. I'm really p1ssed that these things pass off as OEM replacements. It's not like I'm trying to fab a part for some rare, odd car. I can't wait to get my 'we'd love you to review your purchase' email from the reseller!!! (IMG:style_emoticons/default/dry.gif) The rattle, BTW, was a mis-assembled rear sway bar end link. I don't remember when, or who did the work, it was certainly me, with, or without help. Who knows. It's all better now. THAT sh1t fit! :set rant=OFF <return> This post has been edited by CrashTestDummy: Jun 15 2023, 09:11 PM

zlexiss View Member Profile	Jun 17 2023, 09:04 PM Post #2
Advanced Member Group: Advanced Members Posts: 256 Joined: 13-January 04 From: Tucson, AZ Member No.: 123	Gene, went through exactly the same thing with the Dorman stop last month working on my wife's 1992 Camaro RS! I ordered mine from RockAuto and had to do the same slotting of the holes. Same car, 3.1L V6, I'm trying to find a new timing cover for. I've now ordered 4 covers from different manufacturers from different storefronts, and each has the water pump housing (backside) mirrored from my cover so the flow is reverse. All showed the correct part on the part listing photo. I think I'm calling one of the manufacturers next week and asking to lay their hands on the right part for me. -Jeff This post has been edited by zlexiss: Jun 17 2023, 09:06 PM