![]() |
|
![]() |
![]()
Post
#1
|
|
FRRAX Owner/Admin ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 15,432 Joined: 13-February 04 From: Ohio Member No.: 196 ![]() |
One of my buddies suggested that all three of us misfits drag our cars out to an SCCA autocross event to play. This would be Bill and Billy (Racerdad916) and me. We have a rather odd assortment of cars. Bill has a very nicely built 1992 Mustang. This is a full track car with a 331 stroker, flared carbon fiber fenders, etc (it's the car he was autocrossing when we met in 2000, it's actually how we met). We've been breaking stuff together ever since. Racerdad has a 3rd gen that was a bare stripped shell that we collected many years ago. It has a full cage and a particularly nasty small block (Jesel shaft rockers and all) with a T56 that we picked up in pieces in Kentucky one morning. (There were actually four misfits, Billy's neighbor brought out a supercharged Mustang that makes about 480 RWHP, he swapped tires and went to play in CAM and left us behind in CP).
The obvious choice was to go play in CP. Their cars were more CP car than mine (by far), but we knew it was a class we couldn't get protested out of.... Of course a real CP car showed up to play as well. The more the merrier. I took the heaviest car with the least HP and I fully expected to have a good time. And, we did. I haven't driven an autocross event in 12 years. I'm really RUSTY. Rusty as in, I kept forgetting to look ahead and I logged a couple DNF's from blasting through a section of the course and forgetting to keep looking at the next part. My reflexes aren't what they used to be, but I still had some moments of solid mediocrity as a driver. The real national level CP car ran 36.809. My friend Bill in his gutted track car Mustang (it's a built 331 stroker, etc) ran a 38.677. I clipped a single cone on a 39.141 (it was a cone I shouldn't have hit and the car certainly would have done that clean). Racerdad916 ran a 41.215 on some ancient Toyo Proxes that are likely old enough to drink in a bar. Overall, it appears that I might still sorta remember how to drive....sorta.... The car was brilliant. It was well balanced and it did everything well. The UMI coilovers are amazing and I couldn't have been happier with the complete setup. I actually was amazed that the tires did as well as they did. They were 4 year old Hoosier "wet" competition tires on a nearly 90 degree day with no water in sight. I'm not sure they loved the weather, but they made good grip and didn't get particularly greasy. So, I signed up for another event this Sunday.... |
|
|
![]() |
![]()
Post
#2
|
|
FRRAX Owner/Admin ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 15,432 Joined: 13-February 04 From: Ohio Member No.: 196 ![]() |
I'm about to fill the car up again. I don't want to put it away with a full tank. I used to, but it just turns into more bad gas to burn through when I get it back out. So, I like to park it around 1/4 tank. That way I can run it around the block and burn off enough fuel to fill it with premium and be "good". So, I either need to put 5 gallons in it and drive it a bit or I need to fill it and drive it after the truck comes back.
I tried to bed the front brakes today, but I didn't get them hot enough. It feels like a warped rotor. I can't understand how I can bed brakes and park a car and when I get it back out, the brakes are no longer "bedded". I don't know how sitting in my garage allows them to quit working, but it happens every year. I need to go put some real heat in them (the last time I think a stop from 120 mph was a good start on getting them rebedded, I did some warm up first....). I can't get enough heat in these stoptech brakes on the street without doing some "heroic" stunts. |
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 10th May 2025 - 08:56 PM |