[robz71lm7]

Update: Bought one from James.

This post has been edited by robz71lm7: Feb 7 2006, 09:10 PM

[Major_Lee_Slow]

Dan, I can arrange for UPS to pick it up if you parents could package it.

Are all the brackets included?

[DanKeen]

Dan, I can arrange for UPS to pick it up if you parents could package it.

Are all the brackets included?

Sorry for the delay - had to get in touch with the folks.

There are no brackets for the harness bar. There are tabs welded into it for clip-in harnesses, and there's a flat mounting plate on either end with two holes that bolts into the stock seatbelt location. All it requires are some bolts / washers / nuts, which I do not believe are with it.

My dad said he'd be happy to measure it / take it to UPS to get it wrapped - he has no idea how to wrap it to their standards before then. As a warning, I tried to ship it before via UPS, but since it was oversized (it's apparently just outside of the length dimension), it was around $100 to go from Philly to Georgia. So that's why it's still sitting with my folks.

Unfortunately, my dad has a business trip this week, so the soonest he'd be able to get to this would be next week some time - is that okay?

[Major_Lee_Slow]

Dan, I can arrange for UPS to pick it up if you parents could package it.

Are all the brackets included?

Sorry for the delay - had to get in touch with the folks.

There are no brackets for the harness bar. There are tabs welded into it for clip-in harnesses, and there's a flat mounting plate on either end with two holes that bolts into the stock seatbelt location. All it requires are some bolts / washers / nuts, which I do not believe are with it.

My dad said he'd be happy to measure it / take it to UPS to get it wrapped - he has no idea how to wrap it to their standards before then. As a warning, I tried to ship it before via UPS, but since it was oversized (it's apparently just outside of the length dimension), it was around $100 to go from Philly to Georgia. So that's why it's still sitting with my folks.

Unfortunately, my dad has a business trip this week, so the soonest he'd be able to get to this would be next week some time - is that okay?

Hey Dan, I went ahead and bought a new one, but thanks anyway.

MLS

[TOO Z MAXX]

Dan, I can arrange for UPS to pick it up if you parents could package it.

Are all the brackets included?

Sorry for the delay - had to get in touch with the folks.

There are no brackets for the harness bar. There are tabs welded into it for clip-in harnesses, and there's a flat mounting plate on either end with two holes that bolts into the stock seatbelt location. All it requires are some bolts / washers / nuts, which I do not believe are with it.

My dad said he'd be happy to measure it / take it to UPS to get it wrapped - he has no idea how to wrap it to their standards before then. As a warning, I tried to ship it before via UPS, but since it was oversized (it's apparently just outside of the length dimension), it was around $100 to go from Philly to Georgia. So that's why it's still sitting with my folks.

Unfortunately, my dad has a business trip this week, so the soonest he'd be able to get to this would be next week some time - is that okay?

Hey Dan, I went ahead and bought a new one, but thanks anyway.

MLS

Hey Dan I will take it since MLS bought a new one. You could have your parents just ship to your house and I could come and pick it up. I will PM you.

A question on mounting the harnesss bar. Does the bar mount to the rear seat belt mounts? Seems to me it wouldnt need any hardware or extra brackets.

[DanKeen]

Hey Dan I will take it since MLS bought a new one. You could have your parents just ship to your house and I could come and pick it up. I will PM you.

A question on mounting the harnesss bar. Does the bar mount to the rear seat belt mounts? Seems to me it wouldnt need any hardware or extra brackets.

Re: mounting - yes, it doesn't require any hardware besides two bolts and nuts (iirc, it's been a while since I installed / removed it). Basically, the stock seat belts mount to a single bolt, but the harness bar has two (one before and one after the bar itself, think of a plate and bar like: _|_ where the plate is the horizontal section).

For shipping it out here - if you're willing to pay, say, $50 + whatever it takes for my folks to ship it out here, it's yours (IMG:http://www.frrax.com/rrforum/style_emoticons/default/wink.gif)

D

[TOO Z MAXX]

Hey Dan I will take it since MLS bought a new one. You could have your parents just ship to your house and I could come and pick it up. I will PM you.

A question on mounting the harnesss bar. Does the bar mount to the rear seat belt mounts? Seems to me it wouldnt need any hardware or extra brackets.

Re: mounting - yes, it doesn't require any hardware besides two bolts and nuts (iirc, it's been a while since I installed / removed it). Basically, the stock seat belts mount to a single bolt, but the harness bar has two (one before and one after the bar itself, think of a plate and bar like: _|_ where the plate is the horizontal section).

For shipping it out here - if you're willing to pay, say, $50 + whatever it takes for my folks to ship it out here, it's yours (IMG:http://www.frrax.com/rrforum/style_emoticons/default/wink.gif)

D

Sounds good. I hope we can find something better than $100.00 to ship it. their must be a cheaper way. I am not in a hurry so shipping it the cheapest way would be fine. I hear DHL is fairly cheap. Maybe ask them for a quote. How much does it weigh?