48 row oil cooler with fan, brackets and shroud $100 - F-Body Road Racing and Autocross Forums

This setup is lightly used, I built it for a Subaru Sti, my customer did a couple track days with it, then got a job with Ebay and parked the car. Probably less than 10hrs run time on it - motor was fine so it should be clean but best to thoroughly clean any used oil cooler before putting back into service.

Cooler is a stacked plate 48 row, 11" x 11" x 1.5", the brand name is under a bracket, it says made in Canada. It's probably a B&M or Derale. Ports are 1/2" NPT, fittings are -10AN.

Fan is 12" dia Permacool, brackets and partial shroud are custom Blaine Fab. The whole fan/cooler/shroud assy is about 16" tall by 12" wide x 4-1/4" thick, could be adapted to fit a variety of other radiators, or used as a stand alone. New cost on the cooler and fan is about $215, I'm asking ~~$130~~ plus shipping - that includes the brackets, AN fittings, cooler and fan, but not the radiator. How about $100

It is currently mounted on an aftermarket aluminum Sti (I think it was a 2005 model) radiator, which is not included, but if you need the radiator too, let me know and I'll get details on it and cut a good deal.

(IMG:http://blainefab.com/projects/2016-08-09/1-004.JPG)

This post has been edited by Blainefab: Sep 25 2017, 10:14 PM

Blainefab View Member Profile	Aug 10 2016, 04:22 AM Post #1
I build race cars Group: Advanced Members Posts: 4,748 Joined: 31-August 05 From: Central coast, CA Member No.: 874	This setup is lightly used, I built it for a Subaru Sti, my customer did a couple track days with it, then got a job with Ebay and parked the car. Probably less than 10hrs run time on it - motor was fine so it should be clean but best to thoroughly clean any used oil cooler before putting back into service. Cooler is a stacked plate 48 row, 11" x 11" x 1.5", the brand name is under a bracket, it says made in Canada. It's probably a B&M or Derale. Ports are 1/2" NPT, fittings are -10AN. Fan is 12" dia Permacool, brackets and partial shroud are custom Blaine Fab. The whole fan/cooler/shroud assy is about 16" tall by 12" wide x 4-1/4" thick, could be adapted to fit a variety of other radiators, or used as a stand alone. New cost on the cooler and fan is about $215, I'm asking ~~$130~~ plus shipping - that includes the brackets, AN fittings, cooler and fan, but not the radiator. How about $100 It is currently mounted on an aftermarket aluminum Sti (I think it was a 2005 model) radiator, which is not included, but if you need the radiator too, let me know and I'll get details on it and cut a good deal. (IMG:http://blainefab.com/projects/2016-08-09/1-004.JPG) This post has been edited by Blainefab: Sep 25 2017, 10:14 PM