Who needs 3rd gen parts? - F-Body Road Racing and Autocross Forums

Ok, I bought the 3rd gen. I should have it at the house in the next few days. Once it's there, many things will be coming off of it (I'll have a better feel for the condition of the parts as I get things off of the car).

Some things I know I'll have for sale (pricing will be added once I see the condition of the stuff as it comes off):

3rd gen 1LE aluminum driveshaft SOLD

1992 Z28 "F40 style" rear wing SOLD

Most of the interior (Console, carpet, headliner, door panels, etc, it's all grey....the front seats are pretty much junk, but the rest might be useful). mostly thrown away

25mm rear suspension techniques sway bar

Eibach Pro Kit rear springs SOLD

Rear KYB shocks SOLD

Glassteck 2" cowl "bolt on" hood pending

Rear hatch pulldown mechanisim (1992 version) SOLD

Spare tire (folding type for a limited slip car) with the "can" of compressed air (it looks unused, but I can't say 100%). Went in the trash

Split folding rear seat and base (grey). This is the two piece folding rear seat. SOLD

Door panels with non cracked top plastic sections (the panels are a bit dirty, but otherwise in decent shape).pending

Grey carpet (dirty, but it looks decent otherwise). SOLD

Steering wheel with airbag. The wheel is pretty worn out and the cover isn't great. But it has a non-deployed air bag in it. SOLD

Front fog lights with decent lenses (I don't see any cracks). SOLD

Rear seat belts (grey) trashed

Things that will be for sale "shortly":

Spohn torque arm with 6 speed (T56) crossmember (it's a crossmember torque arm mount)

Front KYB shocks SOLD

Eibach Pro Kit front springs SOLD

A set of 1992 Z28 wheels (16" alloys, rough shape, but I think they are round enough for track wheels)

Factory oil cooler just the cooler, the lines are damaged

Slightly farther down the road:

And, I may sell the T56/clutch/flywheel/bellhousing/B&M Ripper setup for a Richmond 5 speed in the future (not sure how soon). Or, it might be packaged with the torque arm/crossmember stuff as well.

I've also got an SLP takeout flywheel for an LT1/1 piece rear main seal engine.

Holley Stealth Ram intake system. I think I'm going to change it out for a single plane EFI intake at some point.

trackbird View Member Profile	May 24 2007, 07:05 PM Post #1
FRRAX Owner/Admin Group: Admin Posts: 15,439 Joined: 13-February 04 From: Ohio Member No.: 196	Ok, I bought the 3rd gen. I should have it at the house in the next few days. Once it's there, many things will be coming off of it (I'll have a better feel for the condition of the parts as I get things off of the car). Some things I know I'll have for sale (pricing will be added once I see the condition of the stuff as it comes off): 3rd gen 1LE aluminum driveshaft SOLD 1992 Z28 "F40 style" rear wing SOLD Most of the interior (Console, carpet, headliner, door panels, etc, it's all grey....the front seats are pretty much junk, but the rest might be useful). mostly thrown away 25mm rear suspension techniques sway bar Eibach Pro Kit rear springs SOLD Rear KYB shocks SOLD Glassteck 2" cowl "bolt on" hood pending Rear hatch pulldown mechanisim (1992 version) SOLD Spare tire (folding type for a limited slip car) with the "can" of compressed air (it looks unused, but I can't say 100%). Went in the trash Split folding rear seat and base (grey). This is the two piece folding rear seat. SOLD Door panels with non cracked top plastic sections (the panels are a bit dirty, but otherwise in decent shape).pending Grey carpet (dirty, but it looks decent otherwise). SOLD Steering wheel with airbag. The wheel is pretty worn out and the cover isn't great. But it has a non-deployed air bag in it. SOLD Front fog lights with decent lenses (I don't see any cracks). SOLD Rear seat belts (grey) trashed Things that will be for sale "shortly": Spohn torque arm with 6 speed (T56) crossmember (it's a crossmember torque arm mount) Front KYB shocks SOLD Eibach Pro Kit front springs SOLD A set of 1992 Z28 wheels (16" alloys, rough shape, but I think they are round enough for track wheels) Factory oil cooler just the cooler, the lines are damaged Slightly farther down the road: And, I may sell the T56/clutch/flywheel/bellhousing/B&M Ripper setup for a Richmond 5 speed in the future (not sure how soon). Or, it might be packaged with the torque arm/crossmember stuff as well. I've also got an SLP takeout flywheel for an LT1/1 piece rear main seal engine. Holley Stealth Ram intake system. I think I'm going to change it out for a single plane EFI intake at some point.