Who here has a CG-Lock?, Just tried mine with some spirited driving= works good! Options

[cdb95z28]

Got a CG-Lock from ApexPerfromance for use in my 95 Z28. I have my 3rd track day coming up a BeaveRun 8/22, figured I would try one out. On my way to work there is a couple nice quick right-lefthanders and sweeping corners. Does a pretty good job of keeping my rear planted in the seat. Didn`t have to "hold on" to the streering wheel.
-Chad

[sgarnett]

It didn't fit the seatbelt on my 2001. I just pull the belt all the way out and twist it to take up the slack and lock it.

[pknowles]

It didn't fit the seatbelt on my 2001. I just pull the belt all the way out and twist it to take up the slack and lock it.

I barrowed one from someone and I really liked it. It fit fine in my 02.

[sgarnett]

For some reason, the tongue assembly differs between the driver and passenger sides on my car. I don't know if that's normal, or if they used multiple vendors, or mine was made on the cusp of a design change, or what. The tongue itself is the same.

I never tried the CG Lock on the passenger side, since I'm not that talented.

[trackbird]

I used one in my 2002 and it had different belts as well. I just clamped it to the plastic cover on the drivers side belt and it worked great!!!!

[loudes13]

Usually you can flip it around and still use it.

btw I still have 3 or 4 for $40 each. If we can meet up, I'm NW of Chicago. I could ship via USPS, but don't know how much that will cost.

[marka]

Howdy,

I've used one here an there... To me, they're better than nothing at all and better than twisting the belt, but a proper 3" lap belt holds me in much better and doesn't dig into my side as badly.

Mark