 Optima Ultimate Streetcar Shootout, I'm gonna do it |
|
|||||||||
  |
 Jun 8 2012, 03:39 AM
Post
#1
|
|
|
Experienced Member  Group: Advanced Members Posts: 1,099 Joined: 14-October 06 From: Mobile, Al Member No.: 1,410  |
I am doing the Power Tour long haul this year.
I am signed up for the qualifier in Arlington Tx. I have a new set of street tires on the car(300 tread wear) I can get by with those, the brake pads are what I am worried about. I bought the best ceramic pads Oreilly had so they wouldn't dust my wheels up, I did the autocross in Muskegon and they did ok. I don't have ny brake ducts either. I had my Carbotech XP 12/10 fronts and the 8's for the rear sent to my hotel.....do I need to put them on? The Optima deal is Autocross Stop Box Eagle Canyon road course(1 lap at a time) Will I be ok with the ceramic pads??????????? Or switch to the Carbotech's? Need some input quick. |
 |
 
|
|
Jun 8 2012, 07:21 AM
Post
#2
|
|
|
Advanced Member Group: Advanced Members Posts: 592 Joined: 16-October 06 From: Logan, UT Member No.: 1,416 |
I'd say switch ... Orielly ceramics are prob not much of a performance pad ...
And you may pick up some stop box points with better brakes ! Good luck (IMG:http://www.frrax.com/rrforum/style_emoticons/default/smile.gif) |
|
|
|
|
Jun 8 2012, 08:45 AM
Post
#3
|
|
|
Nothing says 'I love you.' like a box of Hydroshoks Group: Moderators Posts: 5,284 Joined: 23-December 03 From: Granbury, TX Member No.: 4 |
Eagle's Canyon is a bitch on brakes. 3 long runs into very tight, sharp turns.
We've had some nice rain here over the last couple days. Don't go off-track or it will be ugly ... VERY ugly. Cinch it up, big boy ... ECR ain't BMP. |
|
|
|
|
Jun 8 2012, 12:14 PM
Post
#4
|
|
|
Member Group: Advanced Members Posts: 182 Joined: 27-August 08 Member No.: 2,284 |
What about hawk's pads? or EBC?
|
|
|
|
|
Jun 8 2012, 12:38 PM
Post
#5
|
|
|
Member Group: Advanced Members Posts: 108 Joined: 13-April 12 From: Tomball, TX Member No.: 141,710 |
Good luck and if you have time post up some pictures!
|
|
|
|
|
Jun 8 2012, 02:48 PM
Post
#6
|
|
|
Advanced Member Group: Advanced Members Posts: 321 Joined: 15-November 04 From: Canada Member No.: 542 |
Good luck! Looks like a fun event.
I would love to see how my car would fair in an event like that. I would not even consider any thing less than the Carbotechs. What tire are you planing to use? I think I would have chosen something like a 315 NT05, it has the 200 tread wear and minimum tread depth at 7/32 out of the box. How did you get selected for it or can anyone enter the qualifiers? This post has been edited by Rampant: Jun 8 2012, 02:49 PM |
|
|
|
|
Jun 8 2012, 03:34 PM
Post
#7
|
|
|
Member Group: Advanced Members Posts: 182 Joined: 27-August 08 Member No.: 2,284 |
QUOTE (Rampant @ Jun 8 2012, 10:48 AM)  Good luck! Looks like a fun event. I would love to see how my car would fair in an event like that. I would not even consider any thing less than the Carbotechs. What tire are you planing to use? I think I would have chosen something like a 315 NT05, it has the 200 tread wear and minimum tread depth at 7/32 out of the box. How did you get selected for it or can anyone enter the qualifiers? Most of the events are first come first served. They usually have a car limit and once its met they don't allow any more entries. You have to win the event to qualify for OUSCI. The other option is going thru SEMA, I believe if you are a big time builder and have a car you want to run, they invite some of these nicer high dollar rides over to run as well. I've been to 2-3 events so far, and its always a good time. |
|
|
|
|
Jun 8 2012, 07:37 PM
Post
#8
|
|
|
Experienced Member Group: Advanced Members Posts: 1,528 Joined: 13-January 07 From: Solebury, Pa. Member No.: 1,589 |
Is there a treadwear limit on the donuts you can use for this event?
|
|
|
|
|
Jun 8 2012, 09:55 PM
Post
#9
|
|
|
Advanced Member Group: Advanced Members Posts: 321 Joined: 15-November 04 From: Canada Member No.: 542 |
QUOTE (dailydriver @ Jun 8 2012, 01:37 PM) Is there a treadwear limit on the donuts you can use for this event? I took a quick look at the rules and it showed 200 tread wear. I would pick Hoosier is there was no limit. :-) |
|
|
|
|
Jun 9 2012, 02:14 AM
Post
#10
|
|
|
Veteran Member Group: Member Posts: 2,688 Joined: 23-December 03 From: Ft Worth, TX Member No.: 8 |
I'll be there tomorrow. Let me know if you need some help w/ the track.
|
|
|
|
|
Jun 9 2012, 03:24 AM
Post
#11
|
|
|
Experienced Member Group: Advanced Members Posts: 1,099 Joined: 14-October 06 From: Mobile, Al Member No.: 1,410 |
QUOTE (GlennCMC70 @ Jun 9 2012, 02:14 AM) I'll be there tomorrow. Let me know if you need some help w/ the track. Glenn I will need some help, I put my Carbotech pads on in the parking lot of the hotel and now my pedal is lower than before the swap.....any idea anyone? Possible for you to bring a jack, 2 stands and a 1/2 in drive ratchet? They wore my ass out today, FUCK! I made at least 35 autcross passes today...I am worn out. |
|
|
|
|
Jun 9 2012, 03:28 AM
Post
#12
|
|
|
Veteran Member Group: Member Posts: 2,688 Joined: 23-December 03 From: Ft Worth, TX Member No.: 8 |
QUOTE (FASTFATBOY @ Jun 8 2012, 10:24 PM) QUOTE (GlennCMC70 @ Jun 9 2012, 02:14 AM) I'll be there tomorrow. Let me know if you need some help w/ the track. Glenn I will need some help, I put my Carbotech pads on in the parking lot of the hotel and now my pedal is lower than before the swap.....any idea anyone? Possible for you to bring a jack, 2 stands and a 1/2 in drive ratchet? They wore my ass out today, FUCK! I made at least 35 autcross passes today...I am worn out. I'll see what I can do. Should not be a problem. Are you in the Pewter LS1 F-body? |
|
|
|
|
Jun 9 2012, 10:07 AM
Post
#13
|
|
|
Experienced Member Group: Advanced Members Posts: 1,099 Joined: 14-October 06 From: Mobile, Al Member No.: 1,410 |
QUOTE (GlennCMC70 @ Jun 9 2012, 03:28 AM) QUOTE (FASTFATBOY @ Jun 8 2012, 10:24 PM) QUOTE (GlennCMC70 @ Jun 9 2012, 02:14 AM) I'll be there tomorrow. Let me know if you need some help w/ the track. Glenn I will need some help, I put my Carbotech pads on in the parking lot of the hotel and now my pedal is lower than before the swap.....any idea anyone? Possible for you to bring a jack, 2 stands and a 1/2 in drive ratchet? They wore my ass out today, FUCK! I made at least 35 autcross passes today...I am worn out. I'll see what I can do. Should not be a problem. Are you in the Pewter LS1 F-body? Yes the only 4th gen there. |
|
|
|
|
Jun 9 2012, 11:54 AM
Post
#14
|
|
|
Experienced Member Group: Advanced Members Posts: 1,099 Joined: 14-October 06 From: Mobile, Al Member No.: 1,410 |
QUOTE (FASTFATBOY @ Jun 9 2012, 10:07 AM) QUOTE (GlennCMC70 @ Jun 9 2012, 03:28 AM) QUOTE (FASTFATBOY @ Jun 8 2012, 10:24 PM) QUOTE (GlennCMC70 @ Jun 9 2012, 02:14 AM) I'll be there tomorrow. Let me know if you need some help w/ the track. Glenn I will need some help, I put my Carbotech pads on in the parking lot of the hotel and now my pedal is lower than before the swap.....any idea anyone? Possible for you to bring a jack, 2 stands and a 1/2 in drive ratchet? They wore my ass out today, FUCK! I made at least 35 autcross passes today...I am worn out. I'll see what I can do. Should not be a problem. Are you in the Pewter LS1 F-body? Yes the only 4th gen there. Please call me Glen David 251 605-7112 |
|
|
|
|
Jun 9 2012, 12:26 PM
Post
#15
|
|
|
Experienced Member Group: Advanced Members Posts: 2,038 Joined: 3-March 10 From: Huntersville, NC Member No.: 9,105 |
QUOTE (FASTFATBOY @ Jun 9 2012, 07:54 AM) QUOTE (FASTFATBOY @ Jun 9 2012, 10:07 AM) QUOTE (GlennCMC70 @ Jun 9 2012, 03:28 AM) QUOTE (FASTFATBOY @ Jun 8 2012, 10:24 PM) QUOTE (GlennCMC70 @ Jun 9 2012, 02:14 AM) I'll be there tomorrow. Let me know if you need some help w/ the track. Glenn I will need some help, I put my Carbotech pads on in the parking lot of the hotel and now my pedal is lower than before the swap.....any idea anyone? Possible for you to bring a jack, 2 stands and a 1/2 in drive ratchet? They wore my ass out today, FUCK! I made at least 35 autcross passes today...I am worn out. I'll see what I can do. Should not be a problem. Are you in the Pewter LS1 F-body? Yes the only 4th gen there. Please call me Glen David 251 605-7112 Run the car with the rear end off the ground and in 3rd or 4th and bleed the abs unit. Then shut the engine off and bleed all 4 corners again. Thats the only way I was able to get all the air out. Steve |
|
|
|
|
Jun 9 2012, 02:21 PM
Post
#16
|
|
|
Experienced Member Group: Advanced Members Posts: 1,099 Joined: 14-October 06 From: Mobile, Al Member No.: 1,410 |
QUOTE (Steve91T @ Jun 9 2012, 12:26 PM) QUOTE (FASTFATBOY @ Jun 9 2012, 07:54 AM) QUOTE (FASTFATBOY @ Jun 9 2012, 10:07 AM) QUOTE (GlennCMC70 @ Jun 9 2012, 03:28 AM) QUOTE (FASTFATBOY @ Jun 8 2012, 10:24 PM) QUOTE (GlennCMC70 @ Jun 9 2012, 02:14 AM) I'll be there tomorrow. Let me know if you need some help w/ the track. Glenn I will need some help, I put my Carbotech pads on in the parking lot of the hotel and now my pedal is lower than before the swap.....any idea anyone? Possible for you to bring a jack, 2 stands and a 1/2 in drive ratchet? They wore my ass out today, FUCK! I made at least 35 autcross passes today...I am worn out. I'll see what I can do. Should not be a problem. Are you in the Pewter LS1 F-body? Yes the only 4th gen there. Please call me Glen David 251 605-7112 Run the car with the rear end off the ground and in 3rd or 4th and bleed the abs unit. Then shut the engine off and bleed all 4 corners again. Thats the only way I was able to get all the air out. Steve The pads had to seat to the rotors, its fine now. |
|
|
|
|
Jun 9 2012, 07:53 PM
Post
#17
|
|
|
Experienced Member Group: Advanced Members Posts: 1,528 Joined: 13-January 07 From: Solebury, Pa. Member No.: 1,589 |
QUOTE (Rampant @ Jun 8 2012, 05:55 PM) QUOTE (dailydriver @ Jun 8 2012, 01:37 PM) Is there a treadwear limit on the donuts you can use for this event? I took a quick look at the rules and it showed 200 tread wear. I would pick Hoosier is there was no limit. :-) That puts one onto; NT-05s, 615Ks and the like for the stickiest 200 treadwears which will fit, and be widest, under our cars. Hoosier-Daddies sound great (IF they were allowed), except they will not last too long out on the open roads (from flats due to picking up EVERY SINGLE piece of shrapnel they roll over, as much as from just plain wearing out) if they require a 'cruise-type' drive to prove these are REALLY "street cars". (IMG:http://www.frrax.com/rrforum/style_emoticons/default/wink.gif) |
|
|
|
|
Jun 11 2012, 02:36 PM
Post
#18
|
|
|
Experienced Member Group: Advanced Members Posts: 1,099 Joined: 14-October 06 From: Mobile, Al Member No.: 1,410 |
I ran the event with the Carbotechs, Maxxis MA-V1 300 treadwear street tires. I did ok I guess with lap times in the low 2:20 area. That track is hard to drive as most corners and brake zones are blind.
Was hard to de-tune my brain to run on the street tires after being on the NT-05's Overall it was a great experience. Link to 400+pics including the shootout https://www.facebook.com/media/set/?set=a.1...mp;l=c16e3348e5 Video of my last session http://youtu.be/YaWKqlQabZI |
|
|
|
|
Jun 13 2012, 12:35 PM
Post
#19
|
|
|
Experienced Member Group: Advanced Members Posts: 1,099 Joined: 14-October 06 From: Mobile, Al Member No.: 1,410 |
Autocross times were posted for the day 2 autocross in Muskegon Mi.
I ended up 11th. http://www.furrin.org/Results/tabid/56/art...al--632012.aspx |
|
|
|
|
Jun 13 2012, 10:00 PM
Post
#20
|
|
|
Experienced Member Group: Advanced Members Posts: 1,099 Joined: 14-October 06 From: Mobile, Al Member No.: 1,410 |
Not too bad! I finished 17th overall.
Best lap at Eagles Canyon was a 2:19.437...........Is that good-bad? Final results here http://www.optimainvitational.com/Faceoff%...T%20Results.pdf |
|
|
|
|
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 18th June 2025 - 02:24 PM |