For Sale 1999 Camaro Autox and Track Day Options

[driver91]

I am selling my 1999 Camaro to finish my other project.

Black Hardtop, Roll up windows.
LS1 with LS6 cam and intake, ported throttle body,ported and polished heads, Hooker headers, true duals,ASP underdrive crank pulley, 40# injectors, dyno tuned approx 400 RWHP and 400 RWTQ
Spec stage III clutch with aluminum flywheel
6 speed with 3.73 gears, Torsen T2R
GM performance lightweight aluminum driveshaft
Front Tubular adjustable upper and lower front control arms, bump steer kit, Strano sway bar
Rear Tubular adjustable lower control arms, Fey 2 Watts link, Strano sway bars
Single adjustable Koni's front and rear
Tubular Adjustable torque arm
Slotted rotors, Hawk pads, stainless brake lines
Four point harness bar, two five point harness
Corbeau seats
Manual fan switch
CCW 18 x 11 1/2 front, 17 x 12 1/2 rear
Hoosier A6 315 x 18 front, 335 x 17 rear
Ground Control adjustable spring perches front and rear.
VFN lightweight fiberglass pin on hood
Approx. 3,150 lbs.


Car is currently running in CP but I have all the parts including AC if someone wants to run it in SM, It could go back to ESP but it would need a rear seat and a few other items.

This car has the potential to be the quickest in most regions with the right driver.

Since I put new tires on it two events back it has been 2nd in raw times at the last two events.
www.trscca.com event results to see. CP91 Pro Class

At track days it is consistently one of the fastest cars.

I am asking $9,500.00 with the CCW wheels and Hoosiers with two autox events on them

Without the CCW's and Hoosiers $7,500.00

Any questions call me 615 542-0707 Richard

Email for pictures driver91@comcast.net

This post has been edited by driver91: May 10 2010, 08:48 PM

[driver91]

Price Lowered $6,500.00 without the CCW's and Hoosiers

I am selling my 1999 Camaro to finish my other project.

Black Hardtop, Roll up windows.
LS1 with LS6 cam and intake, ported throttle body,ported and polished heads, Hooker headers, true duals,ASP underdrive crank pulley, 40# injectors, dyno tuned approx 400 RWHP and 400 RWTQ
Spec stage III clutch with aluminum flywheel
6 speed with 3.73 gears, Torsen T2R
GM performance lightweight aluminum driveshaft
Front Tubular adjustable upper and lower front control arms, bump steer kit, Strano sway bar
Rear Tubular adjustable lower control arms, Fey 2 Watts link, Strano sway bars
Single adjustable Koni's front and rear
Tubular Adjustable torque arm
Slotted rotors, Hawk pads, stainless brake lines
Four point harness bar, two five point harness
Corbeau seats
Manual fan switch
CCW 18 x 11 1/2 front, 17 x 12 1/2 rear
Hoosier A6 315 x 18 front, 335 x 17 rear
Ground Control adjustable spring perches front and rear.
VFN lightweight fiberglass pin on hood
Approx. 3,150 lbs.


Car is currently running in CP but I have all the parts including AC if someone wants to run it in SM, It could go back to ESP but it would need a rear seat and a few other items.

This car has the potential to be the quickest in most regions with the right driver.

Since I put new tires on it two events back it has been 2nd in raw times at the last two events.
www.trscca.com event results to see. CP91 Pro Class

At track days it is consistently one of the fastest cars.

I am asking $9,500.00 with the CCW wheels and Hoosiers with two autox events on them

Without the CCW's and Hoosiers $7,500.00

Any questions call me 615 542-0707 Richard

Email for pictures driver91@comcast.net

[kwiker]

Here are a few pictures of the car.

(IMG:http://lh3.ggpht.com/_2CGCdGp255s/S_3hys5bZXI/AAAAAAAAD_I/BP6BWMqVmCA/s640/355.jpg)
(IMG:http://lh4.ggpht.com/_2CGCdGp255s/S_3hywg7raI/AAAAAAAAD_M/0K1uHfPa3hU/s720/720-1.jpg)
(IMG:http://lh3.ggpht.com/_2CGCdGp255s/S_3hzP85zjI/AAAAAAAAD_Q/HLGq9zdN9IY/DSC_3229.jpg)

[driver91]

Price Lowered to $6,000.00 without CCW's And Hoosiers

Bottom price.
Will start parting out soon .

Price Lowered $6,500.00 without the CCW's and Hoosiers

I am selling my 1999 Camaro to finish my other project.

Black Hardtop, Roll up windows.
LS1 with LS6 cam and intake, ported throttle body,ported and polished heads, Hooker headers, true duals,ASP underdrive crank pulley, 40# injectors, dyno tuned approx 400 RWHP and 400 RWTQ
Spec stage III clutch with aluminum flywheel
6 speed with 3.73 gears, Torsen T2R
GM performance lightweight aluminum driveshaft
Front Tubular adjustable upper and lower front control arms, bump steer kit, Strano sway bar
Rear Tubular adjustable lower control arms, Fey 2 Watts link, Strano sway bars
Single adjustable Koni's front and rear
Tubular Adjustable torque arm
Slotted rotors, Hawk pads, stainless brake lines
Four point harness bar, two five point harness
Corbeau seats
Manual fan switch
CCW 18 x 11 1/2 front, 17 x 12 1/2 rear
Hoosier A6 315 x 18 front, 335 x 17 rear
Ground Control adjustable spring perches front and rear.
VFN lightweight fiberglass pin on hood
Approx. 3,150 lbs.


Car is currently running in CP but I have all the parts including AC if someone wants to run it in SM, It could go back to ESP but it would need a rear seat and a few other items.

This car has the potential to be the quickest in most regions with the right driver.

Since I put new tires on it two events back it has been 2nd in raw times at the last two events.
www.trscca.com event results to see. CP91 Pro Class

At track days it is consistently one of the fastest cars.

I am asking $9,500.00 with the CCW wheels and Hoosiers with two autox events on them

Without the CCW's and Hoosiers $7,500.00

Any questions call me 615 542-0707 Richard

Email for pictures driver91@comcast.net

[01badz28]

If you get to the point where you want to part it, I am interested in the following:

I am selling my 1999 Camaro to finish my other project.



GM performance lightweight aluminum driveshaft

Fey 2 Watts link,

Tubular Adjustable torque arm

Maybe the hood as well, depending on price.

[ledfoot2]

Are you interested in any trades?

[driver91]

Are you interested in any trades?

Depends on what you have to trade.

I will listen to any offers.

Thanks

[driver91]

Are you interested in any trades?

Depends on what you have to trade.

I will listen to any offers.

Thanks

This car has roll up windows and manual seat tracks. It was a V6 base model before I transplanted the drivetrain from the Z28.

[GNBS]

I may be interested, e-mail sent. Thanks Greg