A heads up if anyone is looking for an upgraded diff. Would like to sell as a package, but will consider selling TAs and Watts separately.

Moser 12 bolt:
-Eaton HD with Toms Differentials upgraded spiders supposed to be stronger than the usual upgraded spider. I only broke the originals, these have been in the diff since 2005.
-33 spline axles New in 2008
-ARP studs 12mm
-HD Aluminum Girdle cover with preload studs
-3:73 gears Gears, fresh bearing and seals 2010. 3-4kms tops.
-set up for four channel ABS
-1350 pinion yoke
-Includes the backing plates for the rear brakes.$400
-weld in relocation brackets $100
-Spohn sway bar installation kit $75

New price for above is $3339 + shipping and taxes.

1 Full Throttle Welding long Torque Arm. Chrome Moly with Rod ends and Urethane bushings, comes with a cross member for a 6spd. A really nice piece. New price $550 approximately

1 Spohn Short Tunnel mount Torque arm with DS loop. New $415

1 Fayes Watts Link modified to fit (shims and machined pivot hat, drilled out axle clamp for vent) with a 12 bolt with the HD cover. $650

Totals for $5008 if bought new not including taxes or shipping.

$2800 takes the whole kit including the backing plates, if you want to use your backing plates, I will knock off $200. It will be a lot easier to make it a bolt in though and you could sell you backing plates for at least $200, they are $400 new.

(IMG:https://blufiles.storage.live.com/y1prAzhj960RLkPeJi8z8ZxhmlwkTfypD_b-Wqj1b3ojItIfJzvSShXh-wAWkqdPO0bb4R_7EGS6D4/IMG_3074.jpg)

(IMG:https://blufiles.storage.live.com/y1p6snl6w30RKxn_tl5OiDTPTySy3FVi6XZyVuQccTdwDzTzHmupyaQnPivSKt2eLTe2T4z70OQDNY/IMGP2859.jpg)

(IMG:https://blufiles.storage.live.com/y1pWlSzeDn87h7ATlO8nziLnhvZowMcQn4DauFl1b6EO4Ku5_gMEfoHbqwj_0ufmgEXklI5xVfBYmM/IMG_3520.JPG)

(IMG:https://blufiles.storage.live.com/y1psPVGoS8Bt55TJzIm-YiM29nJSnMQEw3u_VVZLTcHI3leOkT9STxjJANK91mB4d-hTTj8Mrqx5f8/IMG_3521.JPG)


I will have to get pics of the long and short TAs.

Let me know if you are interested. My new one will be a couple months. BTW it is a Midwest Chassis 9" with a Watts link.

Might be willing to discuss the driveshaft too, it is a steel one with 1350 Spicer yokes and upgraded HD U joints.

I am in Canada, but only about 35 minutes from Niagara Falls New York. Meeting Windor Ont is also a possibility.

5-6 weeks out now. Let me know if you need a solid diff complete with TA and Watts Link.