4th Gen and go-fast parts |
|
4th Gen and go-fast parts |
May 9 2014, 01:42 PM
Post
#1
|
|
Member Group: Advanced Members Posts: 95 Joined: 15-October 08 Member No.: 2,552 |
Cleaning out the shop. All parts off the 4th gen CMC car. Pictures upon request. ALL PRICES DO NOT INCLUDE SHIPPING. If you’re interested in something, I’ll get an actual UPS quote, or, we’ll work something out. I run the NASA Midwest schedule, so within the “family and friends” network at the track, we can probably get parts close enough for you to pick up. Contact me direct at kos-at-smallbytes-dot-net or 608-thee three two-0130
Firesense AFFF system 4 liter bottle with mounting bracket, 6 nozzles, 5 T's, 3 straight fittings, 1 bulkhead fitting, 2 discharge handles, aprox 15 feet of hose. Bottle certification to 4/12/15. BOTTLE HAS BEEN DISCHARGED AND WILL NEED REFILLING. SOLD Auburn Racers differential 542088 GM 10-bolt 28 spline 3 series. 2 track sessions on brand new D-REX rebuild SOLD T-56 main shaft and stock 5th and 6th gear. This is from a 2.66 tranny. 37/29 teeth cluster, 58 tooth, 67 tooth. $350 Will separate. THIRD GEAR SOLD. STILL HAVE CLUSTER AND 6TH. MAKE OFFER Koni DA dampers front and rear. Front’s 8242-1005-SP1 with GRound Control coilover kit. Rears 8242-1006-SP1, Both rebuilt by Koni and have 3 race weekends of use since rebuilt. $850 Will separate. FOUND OUT ONE OF THE FRONT SHOCKS IS BLOWN. WILL SELL AS REBUILDABLE CORES. MAKE OFFER. Will separate GC coilover kit. Front Springs 2 ½” x 10” 675lb, $80/PR Rear Springs 5 ½” pigtail all cut/bent to 10”. 300lb, 325lb, 350lb. $50/PR B&M Shifter for T-56 SOLD Blain Fab front LS brake ducts. Ducts only, no hardware SOLD LT-1 used parts. All take-offs, or things I’ve purchased over the years for spares. Call me if you need anything LT-1, I have a ton of stuff. Heads $75 ea. Intake manifolds $45 ea. Water pumps $35 ea. Starters $20 ea This post has been edited by koserv: Jun 26 2014, 05:14 PM |
|
|
May 9 2014, 09:09 PM
Post
#2
|
|
newbie Group: Members Posts: 33 Joined: 19-April 14 From: Palo Alto, CA Member No.: 223,808 |
Cleaning out the shop. All parts off the 4th gen CMC car. Pictures upon request. ALL PRICES DO NOT INCLUDE SHIPPING. If you’re interested in something, I’ll get an actual UPS quote, or, we’ll work something out. I run the NASA Midwest schedule, so within the “family and friends” network at the track, we can probably get parts close enough for you to pick up. Contact me direct at kos-at-smallbytes-dot-net or 608-thee three two-0130 Firesense AFFF system 4 liter bottle with mounting bracket, 6 nozzles, 5 T's, 3 straight fittings, 1 bulkhead fitting, 2 discharge handles, aprox 15 feet of hose. Bottle certification to 4/12/15. BOTTLE HAS BEEN DISCHARGED AND WILL NEED REFILLING. $250. Auburn Racers differential 542088 GM 10-bolt 28 spline 3 series. 2 track sessions on brand new D-REX rebuild through Auburn. Will sell with a ring and pinion if you tell me what you want. $475 without R/P, $550 with. T-56 main shaft and stock 5th and 6th gear. This is from a 2.66 tranny. 37/29 teeth cluster, 58 tooth, 67 tooth. $350 Will separate. Koni DA dampers front and rear. Front’s 8242-1005-SP1 with GW coilover kit. Rears 8242-1006-SP1, Both rebuilt by Koni and have 3 race weekends of use since rebuilt. $850 Will separate. Front Springs 2 ½” x 10” 650lb, 675lb, 700lb. $80/PR Rear Springs 5 ½” pigtail all cut/bent to 10”. 300lb, 325lb, 350lb. $50/PR B&M Shifter for T-56 $20 Blain Fab front LS brake ducts. Ducts only, no hardware $100 LT-1 used parts. All take-offs, or things I’ve purchased over the years for spares. Call me if you need anything LT-1, I have a ton of stuff. Heads $75 ea. Intake manifolds $45 ea. Water pumps $35 ea. Starters $20 ea I will take the ducts! Sending PM now. |
|
|
May 12 2014, 11:03 AM
Post
#3
|
|
Member Group: Advanced Members Posts: 95 Joined: 15-October 08 Member No.: 2,552 |
Don't be afraid to make offers.....
Thanks! KO |
|
|
May 13 2014, 02:14 PM
Post
#4
|
|
Member Group: Advanced Members Posts: 183 Joined: 26-November 13 Member No.: 223,779 |
interested in the DA front and rear with a set of springs. sending pm
|
|
|
May 18 2014, 02:20 PM
Post
#5
|
|
Member Group: Advanced Members Posts: 95 Joined: 15-October 08 Member No.: 2,552 |
Found one of the front Koni's was blown. Will separate Ground Control coilover kit. Make offer on the front shock bodies as rebuildable cores.
This post has been edited by koserv: May 19 2014, 03:42 PM |
|
|
May 19 2014, 02:00 PM
Post
#6
|
|
newbie Group: Members Posts: 26 Joined: 8-August 11 Member No.: 97,179 |
INTERESTED IN THE COIL OVER SETUP.... HOW MUCH?
|
|
|
May 19 2014, 03:42 PM
Post
#7
|
|
Member Group: Advanced Members Posts: 95 Joined: 15-October 08 Member No.: 2,552 |
PM sent.....
|
|
|
May 19 2014, 03:51 PM
Post
#8
|
|
Member Group: Advanced Members Posts: 233 Joined: 27-December 03 Member No.: 53 |
Kent,
What's the FIresense bottle capacity? 2.25L or 4.0 L? Is it mechanically or electrically actuated? |
|
|
May 19 2014, 08:05 PM
Post
#9
|
|
Member Group: Advanced Members Posts: 95 Joined: 15-October 08 Member No.: 2,552 |
|
|
|
May 21 2014, 10:29 AM
Post
#10
|
|
Member Group: Advanced Members Posts: 95 Joined: 15-October 08 Member No.: 2,552 |
Pete, you going to make G-man? I could toss it in the trailer and you can have a look-see...
|
|
|
May 21 2014, 06:13 PM
Post
#11
|
|
Member Group: Advanced Members Posts: 233 Joined: 27-December 03 Member No.: 53 |
|
|
|
May 29 2014, 02:02 PM
Post
#12
|
|
Member Group: Advanced Members Posts: 183 Joined: 26-November 13 Member No.: 223,779 |
payment sent for 2 pairs of front springs
|
|
|
May 30 2014, 10:36 AM
Post
#13
|
|
Member Group: Advanced Members Posts: 95 Joined: 15-October 08 Member No.: 2,552 |
Got it....package sent.
|
|
|
Jun 26 2014, 01:43 PM
Post
#14
|
|
Member Group: Advanced Members Posts: 175 Joined: 18-February 04 Member No.: 228 |
How much did you pay to have the koni's rebuilt? Trying to figure out how much to offer.
|
|
|
Jun 26 2014, 11:46 PM
Post
#15
|
|
Member Group: Advanced Members Posts: 95 Joined: 15-October 08 Member No.: 2,552 |
How much did you pay to have the koni's rebuilt? Trying to figure out how much to offer. $638.19, not including freight. I think it was about $35 or so each way, so let's just round off the rebuild at $700. That is for both front and rear dampers. The fronts had three-ish weekends on them after the rebuild, so I'm pretty PO'ed that one of them puked just sitting on the bench. I finished the year on the rears, so they have a full season on the rebuild. |
|
|
Lo-Fi Version | Time is now: 27th April 2024 - 03:25 AM |