[Simon_Z28]

Has anyone got a pair of the 360lb/in 1LE front springs p/n: 22132887 that they want to sell?
I'd be interested in the set of 4 22132887/22132889 also.

Thanks,

- Simon.

[z28barnett]

I bought a used set of 1LE Front springs, and a NOS set of rear 1LE springs from gryhead.


The front springs I have had my hands on have the following rough dimensions.


P/N Wire Diameter Number of Coils Outside Dia. Free Length

(Stock) 22077195 .570" 9 4.59" 15.5"

(NOS) 22197228 .565" 9 4.56" 15.5"

(NOS) 22077196 .570" 10 4.58" 15.5"

(1LE) 22132561 .580" 9 4.52" 13.75"


To identify the rear 1LE springs look for a plastic spacer on a tightly wound spring coil near the top. This coil must be the progressive part of the 130-170 lb/in. It has the partnumber 22132889 it is also a good discontinued 1LE number. [http://www.gyrhead.com/special.htm]http://www.gyrhead.com/special.htm[/URL] , Has the rear spring.


To identify the 1LE front spring. Look for a spring that is shorter than stock by 1.75" and has .580 wire. I have not had my hands on the 22132887 1LE spring so I can't give you a way to identify it, but it should be similar to the 22132561.

My ride height is 28" at the front and 27 3/4" at the rear.

[SStrokerAce]

(1LE) 22132561 .580" 9 4.52" 13.75"

To identify the rear 1LE springs look for a plastic spacer on a tightly wound spring coil near the top. This coil must be the progressive part of the 130-170 lb/in. It has the partnumber 22132889 it is also a good discontinued 1LE number. [http://www.gyrhead.com/special.htm]http://www.gyrhead.com/special.htm[/URL] , Has the rear spring.

To identify the 1LE front spring. Look for a spring that is shorter than stock by 1.75" and has .580 wire. I have not had my hands on the 22132887 1LE spring so I can't give you a way to identify it, but it should be similar to the 22132561.

Oddly enough my 2000 SS stock springs are the LT1 1LE part numbers. They are identical to what you mention both front and rear and the tag on the fronts was a 22132561 PN

Maybe someone should update those charts on the 1LE parts?

Bret