[AutoXer]

Hello,
A friend just purchased Bob Anderson's ESP camaro. It's a 1994 Z28. It has the typical "Strano" setup except it doesn't have the 35mm front bar (yet) and has Koni double adjustable shocks.

Since we are pulling the front K member, the car will need to go on an alignment rack. When I ran F stock I just maxed camber and put 1/16 of toe out. With the coil overs we will be able to do a cross corner weight and set ride height. I have a few questions:

1. What do you guys get for front camber?
2. What do you set ride height at and how do you measure it?
3. How much toe out? Any?
4. What should we run for tire pressure? The tires will be old Kuhmo V710's (for now)

Thanks for the help!
Chris Shay

[ESPCamaro]

Hello,
A friend just purchased Bob Anderson's ESP camaro. It's a 1994 Z28. It has the typical "Strano" setup except it doesn't have the 35mm front bar (yet) and has Koni double adjustable shocks.

Since we are pulling the front K member, the car will need to go on an alignment rack. When I ran F stock I just maxed camber and put 1/16 of toe out. With the coil overs we will be able to do a cross corner weight and set ride height. I have a few questions:

1. What do you guys get for front camber?
2. What do you set ride height at and how do you measure it?
3. How much toe out? Any?
4. What should we run for tire pressure? The tires will be old Kuhmo V710's (for now)

Thanks for the help!
Chris Shay

Bob's car was pretty damn good. Basic but good.
at least -1.5 camber maybe more at 25-3/4.
1/8-3/16 toe out. But this is all a preference thing.
32 25 psi when I had a similar car/tires.