[AutoXer]

Hello,
A friend just purchased Bob Anderson's ESP camaro. It's a 1994 Z28. Bob had a shop rebuild the motor and had a high volume oil pump installed. Now there is a momentary drop in oil pressure when you are on the breaks very hard (racing hard). The Lt1 still has the factory oil pan. The oil pressure problem needs to be fixed before it goes back racing.


My current thought is that since we need to drop the K member to get at the pump or the pan, we might as well just put in a racing pan and reset the height of the oil pump. It looks like the Moroso pan and pick up tube are the way to go. Here is the pan: http://spideraccessories.stores.yahoo.net/moroso20185.html

What do you guys think?

Are their any tricks to dropping the K member? It looks fairly straight forward.

Thanks,
Chris Shay

[ESPCamaro]

Hello,
A friend just purchased Bob Anderson's ESP camaro. It's a 1994 Z28. Bob had a shop rebuild the motor and had a high volume oil pump installed. Now there is a momentary drop in oil pressure when you are on the breaks very hard (racing hard). The Lt1 still has the factory oil pan. The oil pressure problem needs to be fixed before it goes back racing.


My current thought is that since we need to drop the K member to get at the pump or the pan, we might as well just put in a racing pan and reset the height of the oil pump. It looks like the Moroso pan and pick up tube are the way to go. Here is the pan: http://spideraccessories.stores.yahoo.net/moroso20185.html

What do you guys think?

Are their any tricks to dropping the K member? It looks fairly straight forward.

Thanks,
Chris Shay

I had a similar issue and lost a motor because of it. A stock volume pump is a requirement. You don't need all the oil on the top of the engine. I did have a high pressure spring though. And a Canton road race pan for the LT1. Problem solved. And I beat the piss out of that engine.