Ohio LeMons team - F-Body Road Racing and Autocross Forums

Hi, I'm from Columbus OH, part of a group from the GRM forum who are assembling a LeMons/Chump team around a 1985 Camaro.

I have zero f-body experience and have a backround in vw/bmw so I have much to learn.

The car is a v8/5speed with several layers of paint/bondo/rust, our plan is to run a mild 350 through a t5 and 9 bolt limited slip rear axle.
We have some hope of making the April 16-17th race at Gingerman but it's going to be one hell of a push to make the event.

A roll cage is the first order of business, at this point it's a toss up between a pre-bent kit from S&W or another supplier or me spending the time to make templates and have Tubular Techniques bend a cage.

List of parts we're looking for, cheap cast off stuff and local preferred

transmission cross member
t5 bellhousing
clutch/flywheel
clutch fork
clutch master/slave/line
pedal box

front calipers - standard size or larger
rear calipers
performance pads
torque arm
Twin Fans
Radiator
16" wheels

The car prior to being extracted from a snow bank in Scott OH
(IMG:http://farm6.static.flickr.com/5176/5422234214_851d5f1121_z.jpg)

Behind my shop awaiting drivetrain/safety items
(IMG:http://farm6.static.flickr.com/5254/5462380742_dfd4916d1c_z.jpg)

This post has been edited by ansonivan: Feb 23 2011, 02:52 PM

ansonivan View Member Profile	Feb 23 2011, 02:44 PM Post #1
newbie Group: Members Posts: 7 Joined: 18-January 11 Member No.: 43,083	Hi, I'm from Columbus OH, part of a group from the GRM forum who are assembling a LeMons/Chump team around a 1985 Camaro. I have zero f-body experience and have a backround in vw/bmw so I have much to learn. The car is a v8/5speed with several layers of paint/bondo/rust, our plan is to run a mild 350 through a t5 and 9 bolt limited slip rear axle. We have some hope of making the April 16-17th race at Gingerman but it's going to be one hell of a push to make the event. A roll cage is the first order of business, at this point it's a toss up between a pre-bent kit from S&W or another supplier or me spending the time to make templates and have Tubular Techniques bend a cage. List of parts we're looking for, cheap cast off stuff and local preferred transmission cross member t5 bellhousing clutch/flywheel clutch fork clutch master/slave/line pedal box front calipers - standard size or larger rear calipers performance pads torque arm Twin Fans Radiator 16" wheels The car prior to being extracted from a snow bank in Scott OH (IMG:http://farm6.static.flickr.com/5176/5422234214_851d5f1121_z.jpg) Behind my shop awaiting drivetrain/safety items (IMG:http://farm6.static.flickr.com/5254/5462380742_dfd4916d1c_z.jpg) This post has been edited by ansonivan: Feb 23 2011, 02:52 PM

ansonivan View Member Profile	Apr 16 2011, 01:46 AM Post #2
newbie Group: Members Posts: 7 Joined: 18-January 11 Member No.: 43,083	Working on the car this weekend, intending to install an S&W cage. Obviously missed the April race at Gingerman, now using the pre-sanctioned marital calendar time to catch up on the car (IMG:http://www.frrax.com/rrforum/style_emoticons/default/smile.gif) The main and top hoops fit the car quite well, the A-pillar/down tubes are less than good. I did try inverting the tube so that the short bent section is at the top but that results in the tube being very far from parallel to the A-pillar. All tacked progress so far, input most welcome. (IMG:http://farm6.static.flickr.com/5186/5622762407_9cf93a473d_b.jpg) (IMG:http://farm6.static.flickr.com/5068/5622761893_56dbf6b420_b.jpg) (IMG:http://farm6.static.flickr.com/5182/5623348486_22eab30f72_b.jpg) (IMG:http://farm6.static.flickr.com/5067/5622766459_0001de3d1b_b.jpg) This post has been edited by ansonivan: Apr 16 2011, 01:48 AM