![]() |
|
![]() |
![]()
Post
#1
|
|
Member ![]() Group: Advanced Members Posts: 223 Joined: 13-February 05 From: Mexico city Member No.: 648 ![]() |
Hello guys!
I am an "old member" of this forum, and even though I have been here for a while and I do not post lot... read a lot nontheless. Well, I consider myself a true fan of the 4th gen F body platform, to the point the car I have chosen to put all my "nuts" in haha! I got my F ride directly from one dealer back in 1999, brand new, and the improvement over the car has always been step by step... Unfourtunately, yesterday at the tuffest race track we have here in México, my luck and proud encountered a wall tuff enough to challenge them: Couple of guy from security checking before towing: (IMG:http://i248.photobucket.com/albums/gg187/Rudolphinski/crahatthetrack1.jpg) Once in the parking lot: (IMG:http://i248.photobucket.com/albums/gg187/Rudolphinski/parkinglot.jpg) Before: (IMG:http://i248.photobucket.com/albums/gg187/Rudolphinski/Imagen2204.jpg) Yesterday, my humor and will was prettey much as the car!! Today, the thing that comforts me the most, its my oldest and most experienced friend saying: -"Rudolph"... "there are 2 types of people in the racing department... the ones that have been involved in a crash, and the ones that will be, sooooo... fix the car as well as you can, and jump in again". I know that many of you guys have had, some kind of experience, such as the one am in, but damn, it is tuff. Now, on the serious side!! I am only hoping I can find the most experienced guy that can help me to leave the car as it was before, meaning, "HANDLING", structural integrity, and at last, look as well as before. If you guys, have some sort of comments on straighten the "chassis" (I know it is not a chassis literally) by all means, do it. I fear the car may never be the same again, talking about performance in the handling department, I will try it tough. Anyway, thanks for reading. Rodolfo Lara Pohlenz This post has been edited by Rudolph: Apr 2 2012, 09:26 PM |
|
|
![]() |
![]()
Post
#2
|
|
FRRAX Owner/Admin ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 15,432 Joined: 13-February 04 From: Ohio Member No.: 196 ![]() |
I backed an '89 Formula Firebird into a hillside years ago, it was the same situation. It got loose, I caught it, it snapped the other way, I caught it again and about the third time I ran out of steering travel to catch it. It went around and I put both feet in. I bumped the hillside on the drivers rear corner and scratched up the bumper cover pretty good. Looks like we hit in the same place. Lucky for me I had bled off almost all of my speed before hitting the dirt hillside and the damage was far less. I was about 21 at the time and out doing this stuff in places I shouldn't.
Once I tore that same '89 Formula apart to put a roll cage in it I found that the roof, front fender, door and rear quarter panel (all on the passengers side) had been grafted onto that car from a couple other cars (the car was black, the roof, front fender and rear quarter panel was originally blue, and the door was originally red. Then I found that the formed hoops in the transmission tunnel had been compressed. The car had apparently been hit very hard, pulled out, pieced together and it aligned and ran straight and true. It's amazing what a body shop can fix (though I suspect it should have been totalled, but someone at the body shop likely bought it and fixed it). |
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 3rd May 2025 - 05:09 PM |